Takes a 1/2" bit to pass a pre-terminated SC connector, unless you are using the type where you put on the connector shell later.
On Tue, Aug 25, 2020 at 3:14 PM Lewis Bergman <lewis.berg...@gmail.com> wrote: > Where do you buy those booger picks? > > On Tue, Aug 25, 2020 at 2:05 PM <ch...@wbmfg.com> wrote: > >> 5’ step ladder >> >> *From:* ch...@wbmfg.com >> *Sent:* Tuesday, August 25, 2020 12:49 PM >> *To:* AnimalFarm Microwave Users Group >> *Subject:* Re: [AFMUG] Installer tool list >> >> This is how it currently looks now: >> >> >> *Installer’s Tool Bag/Belt* >> >> Electric drill >> >> Phillips bit for drill >> >> Bell hangers bit. .250” >> >> Arrow T-18 stapler and staples >> >> Markers >> Zip tie labels >> Zip ties >> Screw-in anchors >> >> *Installer’s Truck - MEL* >> >> 2 Batteries >> >> Charger that can plug into 12V >> >> Arrow T-18 Staples >> >> Glow rods >> >> Long flex bit >> >> Alcohol >> One click cleaners for SC/APC >> #6, 8 & 10 Philips pan head sheet metal screws >> >> Duct Cutter >> >> VFL >> >> *Optional but recommended* >> >> Fish tape >> >> Caulk >> Electrical tape (at least black and white, red and green) >> Micro screwdrivers >> Standard screwdrivers >> Mini socket set with common sizes >> open end wrenches in common sizes (maybe 5 metric, 5 ANSI with a >> different size on each end of the wrench) >> Several types of pliers (linesman, needle nose, common) >> Diagonal cutters (big ones, and tiny nippers) >> Hammer >> Crescent wrench >> Vise Grips >> Pipe wrench >> Micro screwdrivers >> Spudger/booger pick >> Wire brush >> Utility knife with blades >> Electrician scissors >> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > Lewis Bergman > 325-439-0533 Cell > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
