No, but the Cambium one was like 1/2" thinner. That was the difference
between the door closing or not.
Sorry, I tried.
On 6/15/2020 11:10 AM, ch...@wbmfg.com wrote:
Is transtector thinner than this?
https://www.mccowntech.com/product/dc-surge-suppressor/
If you get fired for using one of my devices I will write you a letter
of recommendation...
*From:* Adam Moffett
*Sent:* Monday, June 15, 2020 8:58 AM
*To:* af@af.afmug.com
*Subject:* Re: [AFMUG] DC surge supression
In my last adventure we installed DC up the tower to 50 or 60 devices
using the $40 Cambium 200SSH. I don't know much about the device, but
after several years of lightning seasons nothing had exploded. That
device was actually chosen due to a physical space restriction and not
because it was believed to be better.
I had looked at the McCown Tech SS as well, but same space limitation
applied as the Transtector. (I was mounting on the inside of a
cabinet door, and there was a limit on thickness of the housing).
Transtector is basically the name brand in this field though. You
won't get fired for buying the Transtector.
On 6/15/2020 10:09 AM, Joe Novak wrote:
I was talking to Ken Ruppel w/ Aviat about this just last week, we
are going to utilize the one they recommended for top of tower:
https://www.streakwave.com/itemdesc.asp?ic=1101-1110
I may consider the din rail one for in the box.
Joe
On Mon, Jun 15, 2020 at 9:05 AM Josh Baird <joshba...@gmail.com> wrote:
For those of you running DC up the tower, what are you using for
surge suppression at the top and bottom?
I have seen these mentioned previously on this list:
https://www.winncom.com/en/products/1101-626
Anything else I should be looking at?
Thanks,
Josh
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
