Whoops, should have been this: https://www.discount-low-voltage.com/Cable/Singlemode-Outdoor-Armored-Preterminated-Fiber (single mode outdoor armored)
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, May 14, 2020 at 9:25 AM Josh Luthman <j...@imaginenetworksllc.com> wrote: > Took 3-5 days if memory serves me right - > https://www.discount-low-voltage.com/Cable/Pre-Terminated-Fiber-Assembly > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Thu, May 14, 2020 at 9:22 AM Nate Burke <n...@blastcomm.com> wrote: > >> Best-Tronics just made me fiber cables in 3 days. But of course, speed >> comes with cost. >> >> On 5/14/2020 5:47 AM, Paul McCall wrote: >> >> Looking for a reliable source for getting custom fiber cables made >> quickly. (and cost effectively). >> >> >> >> We often do short runs (200 to 500 ft.) of fiber (usually just 2 LC UPC >> connectors on it each end, with a pull eye) to go from building to >> building, so in conduit, outdoor rated. While we do our own splicing for >> other things, it seems simpler to have some of these made for us, vs >> figuring out how to take a single strand (x2) spliced to a feed cable and >> make that single strand be structurally solid and with a pull eye on one >> end. >> >> >> >> We do maybe one a month. Was using FS.COM but they are sometimes very >> slow to make them and shipping on their outdoor cable is quite expensive, >> nearly as much (or more than) the cable itself. >> >> >> >> Looked at IntegraOptics but they are *at least* (4) weeks out. >> >> >> >> Paul >> >> >> >> >> >> >> >> *Paul McCall, President * >> >> *Florida Broadband / PDMNet* >> >> *658 Old Dixie Highway* >> >> *Vero Beach, FL 32962* >> >> *772-564-6800* >> >> >> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
