Can’t you just use flat drop cable? Sent from my iPhone
> On May 14, 2020, at 4:48 AM, Paul McCall <pa...@pdmnet.net> wrote: > > > Looking for a reliable source for getting custom fiber cables made quickly. > (and cost effectively). > > We often do short runs (200 to 500 ft.) of fiber (usually just 2 LC UPC > connectors on it each end, with a pull eye) to go from building to building, > so in conduit, outdoor rated. While we do our own splicing for other things, > it seems simpler to have some of these made for us, vs figuring out how to > take a single strand (x2) spliced to a feed cable and make that single strand > be structurally solid and with a pull eye on one end. > > We do maybe one a month. Was using FS.COM but they are sometimes very slow > to make them and shipping on their outdoor cable is quite expensive, nearly > as much (or more than) the cable itself. > > Looked at IntegraOptics but they are at least (4) weeks out. > > Paul > > > > Paul McCall, President > Florida Broadband / PDMNet > 658 Old Dixie Highway > Vero Beach, FL 32962 > 772-564-6800 > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
