The thread at community.cambiumnetworks.com indicates the problem is specifically with upstream frame utilization, and being higher after the FW upgrade, not necessarily going to 100%. Cambium posted they have confirmed it but they think it is just a reporting issue, but another post questions that assertion.
From: AF <af-boun...@af.afmug.com> On Behalf Of Brandon Yuchasz Sent: Thursday, March 26, 2020 10:25 PM To: 'AnimalFarm Microwave Users Group' <af@af.afmug.com> Subject: Re: [AFMUG] 450 platform and firmware 16.1.1 and 16.1.1.1 frame utilazation issues. They are confirming on the forums that this shows up in 16.2 as well. They are looking into if it’s just reporting wrong or an actual issue with the frame utilization. From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Sean Heskett Sent: Thursday, March 26, 2020 10:37 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] 450 platform and firmware 16.1.1 and 16.1.1.1 frame utilazation issues. Not that I’ve seen On Thu, Mar 26, 2020 at 7:33 AM Matt <matt.mailingli...@gmail.com <mailto:matt.mailingli...@gmail.com> > wrote: Does 16.2 have this bug? On Wed, Mar 25, 2020 at 8:07 PM Brandon Yuchasz <li...@gogebicrange.net <mailto:li...@gogebicrange.net> > wrote: > > Just figured I would throw this on the list its already on the forums but it > cost me the better part of the day so here ya go. > > There is a bug in the 16.1.1 and 16.1.1.1 firmware that causes the frame > utilization to peg at or close to 100%. > > 16.1 works fine. > > > > Brandon > > > > -- > AF mailing list > AF@af.afmug.com <mailto:AF@af.afmug.com> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
