I wonder if you did them all at once if the other three coming up disnt current draw your power source and convince the AP that the power sequence had been triggered
On Tue, Mar 24, 2020 at 12:03 PM dave <dmilho...@wletc.com> wrote: > I had seen this very same thing.. What I found out was the firmware on the > ap was in the 2.6 range and jumping to 3.56 I believe may have caused the > hiccup. > Not 100% on that but it was the only thing I could see that was different > because the others had 3.15 on them > > > On 3/24/20 11:56 AM, Nate Burke wrote: > > I have used CNMaestro before, mainly for controlling E4XX AP's, but I'm > just starting to get back into it now for more network > management/upgrades. I was adding one of my EPMP sites in and upgrading > firmware via CNMaestro. One of the 4 AP's at a site reset itself to > Default when the firmware updated from CNMaestro, the other 3 AP's were > fine. I had already manually updated the firmware to 3.5.6 so that it > could connect to CNMaestro, so everything had been recently rebooted. Has > anyone seen this before? This was a batch upgrade where I told it to > update all the AP's and SM's, and only 1 defaulted. Now I'm a little wary > of putting some of my bigger sites in. > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
