I had seen this very same thing.. What I found out was the firmware on
the ap was in the 2.6 range and jumping to 3.56 I believe may have
caused the hiccup.
Not 100% on that but it was the only thing I could see that was
different because the others had 3.15 on them
On 3/24/20 11:56 AM, Nate Burke wrote:
I have used CNMaestro before, mainly for controlling E4XX AP's, but
I'm just starting to get back into it now for more network
management/upgrades. I was adding one of my EPMP sites in and
upgrading firmware via CNMaestro. One of the 4 AP's at a site reset
itself to Default when the firmware updated from CNMaestro, the other
3 AP's were fine. I had already manually updated the firmware to
3.5.6 so that it could connect to CNMaestro, so everything had been
recently rebooted. Has anyone seen this before? This was a batch
upgrade where I told it to update all the AP's and SM's, and only 1
defaulted. Now I'm a little wary of putting some of my bigger sites in.
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
