I just loaded a hydraulic adjustable one on a truck that is going to RB
auctions in SLC...
-----Original Message-----
From: Craig House
Sent: Monday, March 9, 2020 7:25 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] Reel stand recommendations
Cant I'm already pulling a gooseneck with towers sections loaded. Most of
the time I just need it for a 24-30" reel. Occasionally I need it for a 5'
spool but rarely
----- Original Message -----
From: "Chuck McCown" <ch...@wbmfg.com>
To: "AnimalFarm Microwave Users Group" <af@af.afmug.com>
Sent: Monday, March 9, 2020 8:23:46 PM
Subject: Re: [AFMUG] Reel stand recommendations
For stuff that large I go with a reel trailer.
-----Original Message-----
From: Craig House
Sent: Monday, March 9, 2020 7:03 PM
To: AnimalFarm Microwave Users Group
Subject: [AFMUG] Reel stand recommendations
Shopping for a reel stand online and I find way more options than I
expected. Primarily used for guy wire spools with 5000' so weight is
400-500 lbs. I would like to be able to use them for the occasional 5'
spool of 7/8" coax for two way work and for basically anything in between.
I've used the traditional cable screw jack stand type in the past with no
problem and I have also used a ladder and pipe in a pinch. Does anyone have
a preferred type of cable spool stand that they feel is worth
recommendation? Primary use would be for 24 - 30" spools of guy wire
though.
'
Craig
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
