Glad I'm not the only one. On Wed, Feb 26, 2020 at 3:43 PM <ch...@wbmfg.com> wrote:
> “February has been all about getting the work done I expected to be doing > in November and December. “ > > Put that on my tombstone. > > *From:* Forrest Christian (List Account) > *Sent:* Wednesday, February 26, 2020 11:07 AM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] site monitor base 3 availability? > > Very close. I can't give you an exact date right this second, as there > are too many moving parts which all have to come together. I'm going > through and doing all the validation work at this point and cleaning up > anything I find. I'm guessing the week or two after WISPAMERICA at this > point but it could slide another couple weeks as a result of the challenges > in obtaining raw materials right now. > > I ended up spending a couple of months back in November/December figuring > out that the SNMP code that we've been using for years (including in the > RackInjector) wasn't going to work for the SiteMonitor 3. And then trying > and then giving up on a couple of alternative SNMP stacks. After the > holidays, I ended up writing an SNMP stack from scratch and that triggered > some other code changes since there were some architecture decisions I made > to attempt to get around the shortcomings in the original SNMP stack which > weren't valid anymore. Made things a lot nicer/easier, but it was work > getting it there. February has been all about getting the work done I > expected to be doing in November and December. > > At this point it's mostly about doing the final release process and then > doing integration with the Automatic Test. Once that is done and I've > 100% verified that the board design I have is good, we'll order production > boards. There is a chance that I'll end up having to do an additional > (minor) board revision during this process. Normally if that happens, I'll > typically order 10 or so of the new design to verify I didn't screw > something up in the process of fixing whatever was broken, but in this > case, I'll increase the order to whatever is pre-ordered so I can at least > get those out. > > Of course like anything with a schedule the crap could hit the fan and > this schedule goes out the window. > > I will be doing a walkthough of the new devices in the PacketFlux session > on thursday afternoon. > > > On Wed, Feb 26, 2020 at 10:39 AM Steve Jones <thatoneguyst...@gmail.com> > wrote: > >> Its getting at the end of February, what are we looking at in >> availability of these bad boys? >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > - Forrest > > ------------------------------ > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
