I have used the Dymo Rhino for years. The only issue that I have had with it is it will die permanently if you leave it in the truck in the winter and then try to use it while it is frozen. We only label wires inside the boxes. I have seen them start to peel from heat after a few years, but they are still completely legible. I usually take a small strip of packing tape and go around the label and then it stays forever.
On Wed, Feb 19, 2020 at 11:44 AM Lincs_Chel <lhan...@enc-tech.com> wrote: > Hi Matt; > > I use either the 19mm (3/4in) and the 24mm (1in) sizes for the Dymo > flexible series. Depends how you want to wrap the cable. But both sizes > work well for CAT5 cable (outdoor, STP and UTP). > > The amount of info you wish to be printed will dictate the size. I found > the smaller fonts don't print well on the Dymo RHINO series. For the > Brother TZ tapes, the 24mm and 18mm are the equivalent sizes that work well > with the CAT5 cables. > > If you wrap in portrait mode. Either size will work. If you wrap in > landscape mode, (need more characters to display), the 24mm will work > better. As it will fold around the cable (and possibly overlap) fully. > > In either case, the flexible series is better for the CAT5 cables. > > LH > > On 18/02/2020 10:30 AM, Matt wrote: > > I use the heat shrink stock for the rhinos. They are UV listed. >> >> http://www.dymo.com/en-US/ind-heat-shrink-tube-1-4-in >> >> >> > >>>Choose from 1/4", 3/8", 1/2", 3/4" and 1" label widths > > What size do you need for outdoor shielded cat-5? > > > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
