Use a pro power box, seems to be flawless instead of the base having random weird issues
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jan 28, 2020, 1:05 PM Mathew Howard <mhoward...@gmail.com> wrote: > Yeah, that might work, but that's just going to be putting both SM's on > the same layer 2 network anyway... it'd be simpler/cheaper to just throw a > MikroTik PowerBox up there, if that's acceptable. > > On Tue, Jan 28, 2020 at 11:55 AM Ken Hohhof <af...@kwisp.com> wrote: > >> Is this ePMP or 450? I wonder if you could enable POE out on the AUX >> port of a 450i SM to run a second SM? Multiple problems, like 450i SM >> needs 48V, plus Cambium never talks about using the AUX port for another SM >> but rather for things like cameras. I’m not sure if the AUX port POE out >> is 48 or 24 volts. Plus the 450i SM is hideously expensive. >> >> >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Carl Peterson >> *Sent:* Tuesday, January 28, 2020 11:45 AM >> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >> *Subject:* Re: [AFMUG] Cambium POE Splitter >> >> >> >> I've never done it, but UBNT has some gigabit 24V A+B POE injectors for >> AirFiber. You should just be able to split it out on both sides so A POE >> powers one and B POE powers the other. If the topside devices cant take >> power on the data pins, you would need to pick the power off with gigabit >> power taps and put it back onto the power pins. Much (1000X) easier to >> just use a Netonxi 6 min in one of their little plastic od enclosures. >> >> >> >> On Tue, Jan 28, 2020 at 11:32 AM Mathew Howard <mhoward...@gmail.com> >> wrote: >> >> There are ways you could do power on two pairs... might not be very >> pretty, but it can certainly be done. >> >> It's hard to say what would be the best way to do it, without knowing >> exactly what we're trying to accomplish. >> >> >> >> >> >> On Tue, Jan 28, 2020 at 10:30 AM Jason McKemie < >> j.mcke...@veloxinetbroadband.com> wrote: >> >> You can do fast Ethernet with 2 pair, I'm not aware of a way to send >> power up there as well, however. >> >> On Tuesday, January 28, 2020, Matt <matt.mailingli...@gmail.com> wrote: >> >> I have a case where I need to power up two separate Cambium 24 volt >> SMs on rooftop but only need 100base to each. Its very difficult to >> run the second wire at this location which I need. Anyone know of way >> to split the cat5 at bottom and top to do this? Not likely but >> thought I would ask. >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> >> >> -- >> >> Carl Peterson >> >> *PORT NETWORKS* >> >> 401 E Pratt St, Ste 2553 >> >> Baltimore, MD 21202 >> >> (410) 637-3707 >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
