Newer Cambium SMs are polarity agnostic, but yeah good point that the
blue/brown swap might be necessary depending on the model of SM.
On 1/28/2020 11:35 AM, David Coudron wrote:
Depending on what you mean by split, you could do a Cambium POE on the
bottom and a POE powered switch on the top in some kind of weather
proof enclosure. You have to switch the blue and brown wires on both
ends to get the POE side of things right, but we have done that in the
past where we use a Ubiquiti power supply to power the Cambium radio.
This of course would only work if you only need one ethernet
connection at the bottom, but need two at the top.
Regards,
David Coudron
*From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Jason McKemie
*Sent:* Tuesday, January 28, 2020 10:30 AM
*To:* AnimalFarm Microwave Users Group <af@af.afmug.com>
*Subject:* Re: [AFMUG] Cambium POE Splitter
You can do fast Ethernet with 2 pair, I'm not aware of a way to send
power up there as well, however.
On Tuesday, January 28, 2020, Matt <matt.mailingli...@gmail.com
<mailto:matt.mailingli...@gmail.com>> wrote:
I have a case where I need to power up two separate Cambium 24 volt
SMs on rooftop but only need 100base to each. Its very difficult to
run the second wire at this location which I need. Anyone know of way
to split the cat5 at bottom and top to do this? Not likely but
thought I would ask.
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
