Everything is WIFI Now, it probably has a WIFI AP built in, and just
needs a power cord.
On 1/21/2020 4:57 PM, Mathew Howard wrote:
Yeah... there are certainly plenty of people who can do a self install
just fine, but there's a reason that Directv and Dish Network both
shifted away from self installs after the first couple of years...
well, several reasons, including that aligning the antennas got a lot
more complicated, but that probably wasn't the biggest reason.
Plug into the socket and point at the sky sounds good and all, but
there's still the problem of getting the wire from the sock to a place
where you can point at the sky... and keeping the thing where it can
point at the sky. In my experience, most end users don't want to do that.
If they just offer it as an option for people with some clue what
they're doing, perhaps it will work fine.
On Tue, Jan 21, 2020 at 4:41 PM Robert Andrews <i...@avantwireless.com
<mailto:i...@avantwireless.com>> wrote:
The first version of DirecTV was self install, I know because I
did it.
They had many many thousands of successful self installs the
first two
years with just a flashing led to guide you. They are planning on
having the CPE's integrated into the roofs of Tesla cars in the
future.
They aren't joking about making this easy and they are great at
thinking outside the pizza box. Our runway is getting shorter...
On 01/21/2020 01:39 PM, Mathew Howard wrote:
> The CPE end is fixed, in that the antenna is mounted, and
doesn't move.
>
> Unless it's something that you can throw on a desk and plug into an
> outlet, self install simply isn't realistic.
> Dish Network offered a self install option early on (back when
they were
> only using a single satellite, and it was relatively simple)...
they
> gave up on that pretty quickly. Heck, we even had a self install
option
> when we first started doing fixed wireless. It didn't take long
to learn
> a lot of reasons why that's a bad idea.
>
> On Tue, Jan 21, 2020 at 3:30 PM Carl Peterson
> <cpeter...@portnetworks.com <mailto:cpeter...@portnetworks.com>
<mailto:cpeter...@portnetworks.com
<mailto:cpeter...@portnetworks.com>>> wrote:
>
> Ground to LEO isn't fixed wireless. The "tower" is moving
and the
> client is roaming.
>
>
> On Tue, Jan 21, 2020 at 3:21 PM Jason McKemie
> <j.mcke...@veloxinetbroadband.com
<mailto:j.mcke...@veloxinetbroadband.com>
> <mailto:j.mcke...@veloxinetbroadband.com
<mailto:j.mcke...@veloxinetbroadband.com>>> wrote:
>
> Customer installed fixed wireless doesn't work well. I'm
sure
> they'll figure this out too late, I still don't
understand why
> big companies refuse to learn from other's mistakes.
> --
> AF mailing list
> AF@af.afmug.com <mailto:AF@af.afmug.com> <mailto:AF@af.afmug.com
<mailto:AF@af.afmug.com>>
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
>
>
> --
>
> Carl Peterson
>
> *PORT NETWORKS*
>
> 401 E Pratt St, Ste 2553
>
> Baltimore, MD 21202
>
> (410) 637-3707
>
> --
> AF mailing list
> AF@af.afmug.com <mailto:AF@af.afmug.com> <mailto:AF@af.afmug.com
<mailto:AF@af.afmug.com>>
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
>
>
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
