So theoretically, you could probably get them with SMA connectors and put
them on the radio side of the AF11 diplexors?
On Sun, Jan 19, 2020 at 8:33 AM <ch...@wbmfg.com> wrote:
> The problem is keeping one transmitter out of the other. So you have
> hybrid
> combiners and circulators. Those are the only methods I know. You can get
> both at 11 GHz with waveguide or SMA connectors.
>
> -----Original Message-----
> From: Mark Radabaugh
> Sent: Sunday, January 19, 2020 7:06 AM
> To: AnimalFarm Microwave Users Group
> Subject: Re: [AFMUG] 11 ghz combiner
>
> This is usually done using wave guides rather than at the electrical level
> due to the high losses that occur when trying to do it using transmission
> lines. It’s a pretty complex piece of waveguide design - not something
> you
> can cobble together. The vendors with full product lines in the
> microwave
> backhaul market have these solutions already designed and available.
>
> Mark
>
> > On Jan 18, 2020, at 4:20 PM, Bill Prince <part15...@gmail.com> wrote:
> >
> > That would be a tall order. AF11 radios are two-pole already, and the
> > diplexers have a N connector. if you had the right frequencies; maybe,
> but
> > it is difficult for me to visualize.
> >
> > bp
> > <part15sbs{at}gmail{dot}com>
> >
> > On 1/18/2020 12:23 PM, Matt Hoppes wrote:
> >> Does anyone know of a 10-12ghz combiner module?
> >>
> >> Example - I want to run two airFiber 11x radios on one dish.
> >>
> >
> > --
> > AF mailing list
> > AF@af.afmug.com
> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
