No Netonix supplying POE should be connected to any surge suppressor. If you want to protect that line run it through a fuse first then to the surge suppressor and on to the rest of the circuit.
From: Carl Peterson Sent: Monday, July 1, 2019 8:55 AM To: AnimalFarm Microwave Users Group Subject: [AFMUG] POE Fuse, GDT surge, or both at rack before Netonix Switch Lost a netonix IDC switch this weekend. May have been weather related as there was a surge suppressor at an AF24 with some issues post switch replacement. I want to clean things up but I'm concerned about surge suppressors and the netonix switch. Should it be: A) Device-GDT---------(wire run)-----------FUSE----Netonix B) Device--GDT---------(wire run)-----------FUSE---GDT--Netonix B would mean the line comes in, plugs into one of Chucks GDT modules in a PRM-24, then loops to one of Chucks gas discharge modules, then to the switch. Seems complicated. Is there a combined surge/gdt module for the APC style slots? I feel like I've asked this before. -- Carl Peterson PORT NETWORKS 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707 -------------------------------------------------------------------------------- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
