The MUX's I was looking at used two fibers. Are there MUX's that use a
single fiber?
On 6/19/2019 2:40 AM, fiber...@mail.com wrote:
Since you have two fibers, put your PON on one fiber and your DWDM on the
other. Simpler and gives you separation between your consumer traffic and
Ethernet services.
Jared
Sent: Wednesday, June 19, 2019.
From: "Adam Moffett" <dmmoff...@gmail.com>
To: af@af.afmug.com
Subject: Re: [AFMUG] GPON and DWDM on same fiber?
Trying to understand my options is all.
We're getting an IRU for 2 fibers. I'll need several ethernet paths along that
dark fiber so I'm looking at WDM. There's a spot in the middle where I could
break out and serve about 50 households. I *could* build an active POP site
there, but that's tough to fund. I *could* get a 3rd fiber for PON. I *could*
get a 96 channel mux and run ActiveE to each household. All those options
sound like different kinds of suck, so hence wondering if GPON can coexist with
ethernet and WDM.
Sounds like yeah as long as we get the right stuff.
-Adam
On 6/18/2019 2:30 PM, Carl Peterson wrote:
You need single fiber DWDM. Adam, could you diagram out what your trying to
do?
On Tue, Jun 18, 2019 at 1:22 PM Louis Arsenault
<lo...@ntinet.com[mailto:lo...@ntinet.com]> wrote:
NM. you said DWDM. Try this one?
https://www.fs.com/products/70411.html[https://www.fs.com/products/70411.html]
On Tue, Jun 18, 2019 at 2:17 PM Louis Arsenault
<lo...@ntinet.com[mailto:lo...@ntinet.com]> wrote:
I am new to this stuff as well, I am thinking you are looking for something
like this:
https://www.fs.com/products/73961.html[https://www.fs.com/products/73961.html]
On Tue, Jun 18, 2019 at 11:57 AM Chuck McCown
<ch...@wbmfg.com[mailto:ch...@wbmfg.com]> wrote:I have seen this application on
slides at Calex shows. It may take more
than one mux and it might even take some kind of directional coupler, but
they do show how you can mix PON and non PON traffic.
-----Original Message-----
From: Adam Moffett
Sent: Tuesday, June 18, 2019 9:50 AM
To: af@af.afmug.com[mailto:af@af.afmug.com]
Subject: Re: [AFMUG] GPON and DWDM on same fiber?
So it's a feature on some MUX's? Do you know a brand I should look at
for this?
I suppose they must also have an OADM that pulls out just the GPON
wavelengths.
On 6/18/2019 11:20 AM, Chuck McCown wrote:
Yes. But the mux selection will have to be carefully thought through.
-----Original Message----- From: Adam Moffett Sent: Tuesday, June 18, 2019
8:35 AM To: AnimalFarm Microwave Users Group Subject: [AFMUG] GPON and
DWDM on same fiber?
Can I run GPON on the same fiber with a WDM MUX? It looks like the GPON
wavelengths are above and below the DWDM channels, so I'm imagining it
would work, but I don't know jack about jack.
-Adam
--
AF mailing list
AF@af.afmug.com[mailto:AF@af.afmug.com]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com[mailto:AF@af.afmug.com]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
-Louis
NTInet
O: 803-533-1660 X 207
C: 803-997-0004
--
-Louis
NTInet
O: 803-533-1660 X 207
C: 803-997-0004--
AF mailing list
AF@af.afmug.com[mailto:AF@af.afmug.com]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
Carl Peterson
PORT NETWORKS
401 E Pratt St, Ste 2553
Baltimore, MD 21202
(410) 637-3707
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com[http://af.afmug.com/mailman/listinfo/af_af.afmug.com]
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
