I am new to this stuff as well, I am thinking you are looking for something like this: https://www.fs.com/products/73961.html
On Tue, Jun 18, 2019 at 11:57 AM Chuck McCown <ch...@wbmfg.com> wrote: > I have seen this application on slides at Calex shows. It may take more > than one mux and it might even take some kind of directional coupler, but > they do show how you can mix PON and non PON traffic. > > -----Original Message----- > From: Adam Moffett > Sent: Tuesday, June 18, 2019 9:50 AM > To: af@af.afmug.com > Subject: Re: [AFMUG] GPON and DWDM on same fiber? > > So it's a feature on some MUX's? Do you know a brand I should look at > for this? > I suppose they must also have an OADM that pulls out just the GPON > wavelengths. > > > > On 6/18/2019 11:20 AM, Chuck McCown wrote: > > Yes. But the mux selection will have to be carefully thought through. > > -----Original Message----- From: Adam Moffett Sent: Tuesday, June 18, > 2019 > > 8:35 AM To: AnimalFarm Microwave Users Group Subject: [AFMUG] GPON and > > DWDM on same fiber? > > Can I run GPON on the same fiber with a WDM MUX? It looks like the GPON > > wavelengths are above and below the DWDM channels, so I'm imagining it > > would work, but I don't know jack about jack. > > > > -Adam > > > > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- -Louis NTInet O: 803-533-1660 X 207 C: 803-997-0004
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
