does that function as even distribution or round robin or what? On Tue, Mar 12, 2019 at 3:06 PM Josh Luthman <j...@imaginenetworksllc.com> wrote:
> I think what you're saying is your dst-address=0.0.0.0/0 > gateway=1.1.1.1,2.2.2.2 > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Tue, Mar 12, 2019 at 1:51 PM Mark - Myakka Technologies < > m...@mailmt.com> wrote: > >> Timothy, >> >> Been a long time since I've done something like this, being we are using >> BGP now. But, back in the old startup days we were in the same situation. >> >> Here is something to try. >> >> On the router with the 2 connections, setup your default gateway >> 0.0.0.0/0. In the gateway field, put in the fiber gateway. To the >> right you'll see an up and down arrow. If you click on that it will allow >> you to put in a second gateway. >> >> The tik will now use both gateways. I believe if you put the fiber >> gateway in twice and the wireless gateway in once, you may get a 2 to 1 >> ratio. This will only work if you are using private IP addresses to the >> customers and NATing at the router. >> >> If you are using any public IP addresses you'll have to put some routing >> rules in to force it to go out the correct interface all the time. >> >> As I said, been a while, so I may have missed something. I'm sure there >> is better information on a WIKI somewhere. >> >> >> >> -- >> Best regards, >> Mark mailto:m...@mailmt.com <m...@mailmt.com> >> >> Myakka Technologies, Inc. >> www.MyakkaTech.com >> >> ------ >> >> Tuesday, March 12, 2019, 12:37:32 PM, you wrote: >> >> >> asking this for a buddy in the Philippines that has basically no income >> so linkteks not really an option and Mikrotik forum does not seem to like >> me.. >> >> He has 2 internet connections 1 from fiber and has a Public IP >> the other is from a WISP providing a dedicated BH but has a private IP >> address for him to use for the WAN >> >> is there any way to Bond the 2 connections in Mikrotik? >> >> the how-to guides I have been reading do not seem to work >> >> >> Thanks for any help >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
