David, Could you please let me know when you get this alert working? I would be grateful! Sam
On Mon, Jan 28, 2019 at 8:36 PM David Coudron <[email protected]> wrote: > Hi Sam, > > > > We are still learning, but are pretty optimistic about what we’ll be able > to do with this system. > > > > 1. Yes, that is the OID of the Downlink frame utilization from our > other monitoring system. I haven’t tested it out yet, but a similar rule > is working for our Tycon TPDIN MonitorWebs. > 2. The Map To: is a Device Group that we set up and auto pulled the > Cambium APs into it. That way the rule is applied to all Cambium APs by > default. > > > > Feel free to keep in touch, we are just getting our feet wet and I am > guessing we’ll have questions too. I did find a consultant who specializes > in LibreNMS. Seems like he knows his stuff. I had him write us a > special, calculated value based on 5 different OIDs. That thing is going > to be a life saver. > > > > Thanks, > > > > *David Coudron* > > [email protected] | *Mobile: *612-991-7474 > > > > *Advantenon, Inc. * > > [email protected] | 3500 Vicksburg Lane N, Suite 315, Plymouth, MN > 55447 | www.advantenon.com | *Phone:* 800-704-4720 | *Local: * > 612-454-1545 > > > > [image: cid:[email protected]] > > > > *From:* AF <[email protected]> *On Behalf Of * Sam Lambie > *Sent:* Monday, January 28, 2019 9:10 PM > *To:* AnimalFarm Microwave Users Group <[email protected]> > *Subject:* Re: [AFMUG] LibreNMS Alerts > > > > David, > > > > Thank you Sir! A couple of questions if you have a moment. Is that the > entire MIB in the second field for frame utilization? > > And Under Map To: You have a field labeled Cambium AP. What does that do? > > I might have more questions! > > > > Sam > > > > On Mon, Jan 28, 2019 at 6:52 PM David Coudron < > [email protected]> wrote: > > Sam, > > > > I am far from an expert, but we do have a few alerts working in > LibreNMS. If you are doing frame utilization, I am guessing this is on > Cambium AP? If so, we are just messing around setting this up. I think > this one will work: > > > > Regards, > > > > *David Coudron* > > > > > > *From:* AF <[email protected]> *On Behalf Of *Sam Lambie > *Sent:* Monday, January 28, 2019 4:22 PM > *To:* AnimalFarm Microwave Users Group <[email protected]> > *Subject:* [AFMUG] LibreNMS Alerts > > > > Ok, > > I have been diving deep into this and am at a wall. I want to have LNMS > alert me when ANY of my AP's have a frame/downlink utilization go above 90% > > > > Under Alerts Rule, is access_points.radioutil the correct one to choose? > Are there templates for alerts and graphs that anyone wants to share with > me? > > > > Thanks > > Sam > > > > -- > > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > -- > > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
