David, Thank you Sir! A couple of questions if you have a moment. Is that the entire MIB in the second field for frame utilization? And Under Map To: You have a field labeled Cambium AP. What does that do? I might have more questions!
Sam On Mon, Jan 28, 2019 at 6:52 PM David Coudron <[email protected]> wrote: > Sam, > > > > I am far from an expert, but we do have a few alerts working in > LibreNMS. If you are doing frame utilization, I am guessing this is on > Cambium AP? If so, we are just messing around setting this up. I think > this one will work: > > > > Regards, > > > > *David Coudron* > > > > > > *From:* AF <[email protected]> *On Behalf Of * Sam Lambie > *Sent:* Monday, January 28, 2019 4:22 PM > *To:* AnimalFarm Microwave Users Group <[email protected]> > *Subject:* [AFMUG] LibreNMS Alerts > > > > Ok, > > I have been diving deep into this and am at a wall. I want to have LNMS > alert me when ANY of my AP's have a frame/downlink utilization go above 90% > > > > Under Alerts Rule, is access_points.radioutil the correct one to choose? > Are there templates for alerts and graphs that anyone wants to share with > me? > > > > Thanks > > Sam > > > > -- > > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
