Have not yet. On Wed, Nov 7, 2018 at 10:14 AM Cameron Crum <cc...@murcevilo.com> wrote:
> Tried a ferrite bead? > > On Wed, Nov 7, 2018 at 6:41 AM can...@believewireless.net < > p...@believewireless.net> wrote: > >> I ran regular cable between my receiver and amplified subwoofer. >> Approximately a 70ft run >> through the house. Avoided running in parallel with the power lines but >> it is about 6" away >> from an electrical outlet. >> >> No cable plugged into sub, no hum. >> Cable plugged into sub but not into receiver, loud hum. >> >> Plugged in a ground loop isolator device and hum dramatically reduced. >> However, so was >> the signal to the sub. To the point it might be blocking it completely. >> This was a very cheap >> ($9) device from Amazon. >> >> Swapped with shielded Cat5e cable from Shireen. Same results. >> >> Any idea how to fix this? Get better shielded cable? Better isolator? >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
