Thanks Michael,
Here is the output from the tsmdlst command. The tape library is listed as
lb2.1.0.3 below.
Computer Name: TSMANL
OS Version: 6.1
OS Build #: 7601
TSM Device Driver: TSMScsi - Not Running
3 HBAs were detected.
Manufacturer Model Driver Version Firmware
Description
----------------------------------------------------------------------------------------------------------------
TSM Name ID LUN Bus Port SSN WWN TSM
Type Driver Device Identifier
-----------------------------------------------------------------------------------------------------------------------------
mt2.0.0.2 2 0 0 2 10WT010084 - LTO
IBM IBM ULT3580-HH6 D8E5
mt2.0.0.3 2 0 0 3 1068020440 - LTO
IBM IBM ULT3580-HH6 D8E5
lb2.1.0.3 2 1 0 3 00L4U78L0331_LL0 -
LIBRARY IBM IBM 3573-TL B.90
mt2.0.0.4 2 0 0 4 1068014982 - LTO
IBM IBM ULT3580-HH6 D8E5
Thanks & Regards
Paul
-----Original Message-----
Hello Paul,
you are not using persistent names for the devices, and chances are that after
the reboot the devices got different names.
check the actual device names with
c:\program files\tivoli\tsm\server\tsmdlst
and update the pathes to the library and the drives accordingly.
"show libray" should report an online=1 in the 3rd line.
tsm: TSMANL>show library
MMSV->libList: head=000000000537E930, tail=000000000537E930
Library LB0.1.0.6 (type SCSI):
refCount=0, online=0, updateCount=0
If possible, enable sandiscovery:
setopt sandiscovery on
or read the devicedriver documentation of the IBM Tape driver on how to enable
persistent naming, which makes life much easier.
--
Michael Prix
Am 17.03.2016 um 01:21 schrieb Paul_Dudley:
> Further to my message below, the "q library f=d" command does display details
> about the library, as does the "show library" command.
>
>
>
> tsm: TSMANL>q library f=d
>
>
>
> Library Name: LB0.1.0.6
>
> Library Type: SCSI
>
> ACS Id:
>
> Private Category:
>
> Scratch Category:
>
> WORM Scratch Category:
>
> External Manager:
>
> RSM Media Type:
>
> Shared: No
>
> LanFree:
>
> ObeyMountRetention:
>
> Primary Library Manager:
>
> WWN:
>
> Serial Number: 00L4U78L0331_LL0
>
> AutoLabel: No
>
> Reset Drives: No
>
> Relabel Scratch: No
>
> ZosMedia:
>
> Last Update by (administrator): ADMIN
>
> Last Update Date/Time: 12/09/2013 17:38:36
>
>
>
> tsm: TSMANL>show library
>
> MMSV->libList: head=000000000537E930, tail=000000000537E930
>
>
>
> Library LB0.1.0.6 (type SCSI):
>
> refCount=0, online=0, updateCount=0
>
> basicCfgBuilt=1, libInfoBuild=0, definingPathToLibrary=0
>
> addLibPath=0, borrowedDrives=0
>
> passthru=-1
>
> library extension at 0000000005326530
>
> Serial Number: (00L4U78L0331_LL0)
>
> WWN: *EMPTY*
>
> SCSI library scanInProgress=0, relabelScratch=0
>
> autochanger list:
>
> dev=lb2.1.0.2, busy=0, online=0
>
>
>
> drive list:
>
> L6DRI0:
>
> Device Type = LTO,
>
> Drive state: UNKNOWN, Drive descriptor state: NO PENDING
> CHANGES,
>
> Online = 1, polled = 0, nativeFilePolled = 0
>
> Inquiry String = ULT3580-HH6,
>
> Device Type From Inquiry = 21,
>
> RD Capabilities = 00000FC0,
>
> (ULTRIUM6C,ULTRIUM6,ULTRIUM5C,ULTRIUM5,ULTRIUM4C,ULTRIUM4),
>
> WR Capabilities = 00000F00,
>
> (ULTRIUM6C,ULTRIUM6,ULTRIUM5C,ULTRIUM5),
>
> Serial Number: (1068020440)
>
> WWN: (5000E111312AF001)
>
> priorReadFailed = 0, priorWriteFailed = 0, priorLocateFailed =
> 0,
>
> Update count = 0, checking = 0, passthru = -1,
>
> offline time/date: 00:00:00 1900/00/00
>
> SCSI-specific fields:
>
> CleaningFreq(GB)=-1, KBytesProc=0, needsCleaning=0.
>
> appendOnlySupported=-1, appendOnly=0.
>
> lbpRequired=0, lbpEnabled=0, nativeFileExists=-1.
>
> None
>
>
>
> However the update library command fails with the error below:
>
>
>
> tsm: TSMANL>update library lb0.1.0.6 libtype=scsi shared=no resetd=no
> autolabel=no relabelscr=no serial=00L4U78L0331_LL0
>
> ANR8529E UPDATE LIBRARY: Unable to open library LB0.1.0.6 by using an open
> system call.
>
> ANS8001I Return code 11.
>
>
>
>
>
> Thanks & Regards
>
> Paul
>
>
>
>
>
> From: Paul_Dudley [mailto:pdud...@anl.com.au]
> Sent: Thursday, 17 March 2016 11:02 AM
> To: 'ADSM: Dist Stor Manager'
> Subject: Library offline issue
>
>
>
>
>
> We are running TSM version 6.3 on a Windows 2008 server with an IBM TS3200
> tape library. The windows server crashed overnight. It has been rebooted and
> is working ok now however TSM will not talk to the tape library drives.
>
> I have powered the tape library off and on and have also performed a clean
> shutdown and restart of the server.
>
>
>
> When I run "q path" it reports that the library is online.
>
>
>
> tsm: TSMANL>q path
>
>
>
> Source Name Source Type Destination Destination On-Line
>
> Name Type
>
> ----------- ----------- ----------- ----------- -------
>
> TSMANL SERVER LB0.1.0.6 LIBRARY Yes
>
> TSMANL SERVER L6DRI0 DRIVE Yes
>
> TSMANL SERVER L6DRI1 DRIVE Yes
>
> TSMANL SERVER L6DRI2 DRIVE Yes
>
>
>
> tsm: TSMANL>q path f=d
>
>
>
> Source Name: TSMANL
>
> Source Type: SERVER
>
> Destination Name: LB0.1.0.6
>
> Destination Type: LIBRARY
>
> Library:
>
> Node Name:
>
> Device: lb2.1.0.2
>
> External Manager:
>
> ZOS Media Server:
>
> Comm. Method:
>
> LUN:
>
> Initiator: 0
>
> Directory:
>
> On-Line: Yes
>
>
>
> When I run "q drive" it reports that the drives are online.
>
>
>
> tsm: TSMANL>q drive
>
>
>
> Library Name Drive Name Device Type On-Line
>
> ------------ ------------ ----------- -------------------
>
> LB0.1.0.6 L6DRI0 LTO Yes
>
> LB0.1.0.6 L6DRI1 LTO Yes
>
> LB0.1.0.6 L6DRI2 LTO Yes
>
>
>
> However the status of the drives is unknown
>
>
>
> tsm: TSMANL>q drive f=d
>
>
>
> Library Name: LB0.1.0.6
>
> Drive Name: L6DRI0
>
> Device Type: LTO
>
> On-Line: Yes
>
> Read Formats:
> ULTRIUM6C,ULTRIUM6,ULTRIUM5C,ULTRIUM5,ULTRIUM4C,ULTRIUM4
>
> Write Formats:
> ULTRIUM6C,ULTRIUM6,ULTRIUM5C,ULTRIUM5
>
> Element: 256
>
> Drive State: UNKNOWN
>
> Volume Name:
>
> Allocated to:
>
> WWN: 5000E111312AF001
>
> Serial Number: 1068020440
>
> Last Update by (administrator): ADMIN
>
> Last Update Date/Time: 06/04/2015 11:38:08
>
> Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
>
>
>
> When I try to update the drive I get the following error informing me that
> the drive is unavailable.
>
>
>
> tsm: TSMANL>update drive lb0.1.0.6 l6dri0 serial=avoid online=yes
>
> ANR8444E UPDATE DRIVE: Library LB0.1.0.6 is currently unavailable.
>
> ANS8001I Return code 14.
>
>
>
> I can login to the library via the browser GUI and it all looks OK. The "q
> libvol" command seems to work OK and returns the results I expect.
>
> When I check the properties of the SCSI tape drive devices on the windows
> server they report that the devices are working properly.
>
> Any suggestions? Do I have to run an "update path" or "update library"
> command?
>
>
>
> Thanks & Regards
>
> Paul
>
>
>
>
>
> Paul Dudley
>
> IT Operations
>
> ANL Container Line
>
> pdud...@anl.com.au
>
>
>
>
>
>
>
>
> ANL DISCLAIMER
>
> This e-mail and any file attached is confidential, and intended solely
> to the named add ressees. Any unauthorised dissemination or use is
> strictly prohibited. If you received this e-mail in error, please
> immediately notify the sender by return e-mail from your s ystem.
> Please do not copy, use or make reference to it for any purpose, or disclose
> its contents to any person.
--
Message protected by MailGuard: e-mail anti-virus, anti-spam and content
filtering.
http://www.mailguard.com.au
Click here to report this message as spam:
https://console.mailguard.com.au/ras/1O2QqvWkbi/2pjumgZAIC8ILzKYBmj6kf/6.022
ANL DISCLAIMER
This e-mail and any file attached is confidential, and intended solely to the
named add
ressees. Any unauthorised dissemination or use is strictly prohibited. If you
received
this e-mail in error, please immediately notify the sender by return e-mail
from your s
ystem. Please do not copy, use or make reference to it for any purpose, or
disclose its
contents to any person.
