As I found in compatibility matrix TSM support L700e with ascs and L700 without it. I don’t know what is the difference between L700 and L700e but in general L700 will work and supported only with TSM device driver. Also I found this question ( https://forums.aws.amazon.com/thread.jspa?messageID=585674 ) with another problem, but he defined the library in TSM.
Efim > 4 марта 2016 г., в 15:49, Lee, Gary <g...@bsu.edu> написал(а): > > I do see sg devices, the sg device is loaded into the kernel. > > I get an i/o error when trying to define as a libtype=scsi. > > If I try to use the stk l700 emulation, I need the accsls software. > So far, I have found no way to acquire this. > Don't even see a link to buy anywhere on the oracle sight. > > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Efim > Sent: Friday, March 04, 2016 7:38 AM > To: ADSM-L@VM.MARIST.EDU > Subject: Re: [ADSM-L] more amazon vtl config issues > > Hi > Do you have RHEL storage-server package installed, driver loaded to the > kernel (lsmod | grep sg) and you can see sg device? > I correct understood than autoconf doesn’t work? Do you try to run it with -t? > File op.conf is necessary only for optical library. > Efim > > >> 25 февр. 2016 г., в 18:09, Lee, Gary <g...@bsu.edu> написал(а): >> >> Tsm v7.1.1, >> RHEL 6.7 x86_64 platform >> >> Trying to get this amazon storage gateway thing going. >> >> Got lin_tape installed, and it sees all ten drives in the test library. >> >> I think, from reading the administrator's guide, that I must use the tsm >> devicedrivers for the media changer, at least. >> >> Trying to follow the instructions in chapter 5 for configuring with the >> tsmscsi script. >> >> However, have two problems. >> >> >> 1. It says there are no devices in the lb.conf file will paste in >> below. >> >> 2. There is no op.conf.smp to copy and set up. >> >> 3. Is this necessary, and if so, could some one send me one? >> Lb.conf, and the rellavent portion of /proc/scsi/scsi follow: >> >> Section of /proc/scsi/scsi >> >> Host: scsi12 Channel: 00 Id: 00 Lun: 00 >> Vendor: AWS Model: Gateway-VTL Rev: 0100 >> Type: Medium Changer ANSI SCSI revision: 05 >> >> >> >> Lb.conf >> >> >> HOST[0]=12 >> CHANNEL[0]=0 >> ID[0]=0 >> LUN[0]=0 >> >> >> HELP!! Feel like I'm spinning my wheels.
