Hi Do you have RHEL storage-server package installed, driver loaded to the kernel (lsmod | grep sg) and you can see sg device? I correct understood than autoconf doesn’t work? Do you try to run it with -t? File op.conf is necessary only for optical library. Efim
> 25 февр. 2016 г., в 18:09, Lee, Gary <g...@bsu.edu> написал(а): > > Tsm v7.1.1, > RHEL 6.7 x86_64 platform > > Trying to get this amazon storage gateway thing going. > > Got lin_tape installed, and it sees all ten drives in the test library. > > I think, from reading the administrator's guide, that I must use the tsm > devicedrivers for the media changer, at least. > > Trying to follow the instructions in chapter 5 for configuring with the > tsmscsi script. > > However, have two problems. > > > 1. It says there are no devices in the lb.conf file will paste in below. > > 2. There is no op.conf.smp to copy and set up. > > 3. Is this necessary, and if so, could some one send me one? > Lb.conf, and the rellavent portion of /proc/scsi/scsi follow: > > Section of /proc/scsi/scsi > > Host: scsi12 Channel: 00 Id: 00 Lun: 00 > Vendor: AWS Model: Gateway-VTL Rev: 0100 > Type: Medium Changer ANSI SCSI revision: 05 > > > > Lb.conf > > > HOST[0]=12 > CHANNEL[0]=0 > ID[0]=0 > LUN[0]=0 > > > HELP!! Feel like I'm spinning my wheels.
