Eric reg node filer-name passowrd dom=<nas_domain> type=nas user=none
define datamover (data-mover-name> type=nas hla=<ip address of the filer> lla=<filer port number> userid=???? password=???? dataf=celerradump (or whatever format it is) ### Mine was an EMC VG8 filer and i needed to do this also: setopt ndmpprefdatainterface 172.1.50.10 (the ip address of the TSM backup LAN into the TSM server) ### I assume at this point that you already have the library and the path to the library defined ### In my case, i already had 4 drives defined, but to the TSM server. I did'nt use them for TSM though ### So i simply defined four new paths to the existing drive names, but the paths are sourcetype datamover instead of server def path your-filer-name DRIVE01 srct=datamover desttype=drive library=your-library-name_VTL01 device=tape-device-in-the-filer def path your-filer-name DRIVE02 srct=datamover desttype=drive library=your-library-name_VTL01 device=tape-device-in-the-filer def path your-filer-name DRIVE03 srct=datamover desttype=drive library=your-library-name_VTL01 device=tape-device-in-the-filer def path your-filer-name DRIVE04 srct=datamover desttype=drive library=your-library-name_VTL01 device=tape-device-in-the-filer ### Now define the TOC for the NDMP backups. I defined 2 25gb drives DEFINE VOLUME stg_ndmp_toc E:\your-windows-path-name\toc_stg_vol_ formatsize=25000 n=2 And of course you need some tapes in the library, so these will need to be checked in, if not already in there I have VTL's on a Data Domain 990, not 'real' drives and tapes Hope this helps On 1 April 2015 at 19:47, McWilliams, Eric <emcwilli...@medsynergies.com> wrote: > Thanks but I've listened to that already and looked through the power > point slides and still don't understand. > > I already have a tape library defined to the TSM server. How do I get the > NAS data mover to see and communicate with it? > > > Eric > > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of > Gee, Norman > Sent: Wednesday, April 01, 2015 12:10 PM > To: ADSM-L@VM.MARIST.EDU > Subject: Re: [ADSM-L] NDMP > > Try listening to this > https://urldefense.proofpoint.com/v2/url?u=http-3A__www-2D01.ibm.com_support_docview.wss-3Fuid-3Dswg27041348&d=AwIFAg&c=MaiD1Z8YVCD63kI1LCyPtWg0Yfm6VFptlj7wuHNxy-0&r=ohMdG7xLBNfJLpBxDYE1hxG5DHMxVAlyhTmATkid320&m=mAlyejQBCcHkT6KQWSRxQKC7VP5mvRZfLZw-XzZFjuo&s=P6n2F8k8vcb19WZDnFT_Imkm-CkZ3gT_yBymap1MqEI&e= > Look for Configuring NDMP Filer to Server Backups (Also known as "3-way > NDMP Backup") > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of > McWilliams, Eric > Sent: Wednesday, April 01, 2015 9:46 AM > To: ADSM-L@VM.MARIST.EDU > Subject: NDMP > > Okay, what is the secret to setting up TSM to back up a NAS filer? > > We have a NAS (Isilon) but there is no tape library attached to it. The > tape library is attached to the TSM server, which is a Windows server. > I've followed all the instructions I could find but they seem to be geared > to a NAS with a directly attached tape library. > > I've done the following: > Defined a device class > Defined a storage pool > Defined a domain > Defined a policyset > Defined a mgmtclass > Assigned a default mgmtclass > Defined a copygroup > Activated the policyset > Registered the node > Defined a data mover > > I guess what I don't understand is defining paths and drives. I already > have those set up in TSM for the library attached to the server. Whenever > I try to do a backup I get errors: > 2015-04-01, 11:43:12 > > ANR9024E There are no drives available.(SESSION: 46910, PROCESS: 342) > > 2015-04-01, 11:43:12 > > ANR1069E NAS Backup process 342 terminated - insufficient number of mount > points available for removable media. (SESSION: 46910, PROCESS: 342) > > 2015-04-01, 11:43:12 > > ANR0985I Process 342 for BACKUP NAS (FULL) running in the BACKGROUND > completed with completion state FAILURE at 11:43:12. (SESSION: 46910, > PROCESS: 342) > > 2015-04-01, 11:43:12 > > ANR1893E Process 342 for BACKUP NAS (FULL) completed with a completion > state of FAILURE. (SESSION: 46910, PROCESS: 342) > > > I'm using this guide: > > https://urldefense.proofpoint.com/v2/url?u=http-3A__publib.boulder.ibm.com_tividd_td_SMAIXN_GC32-2D0768-2D00_en-5FUS_HTML_anragd62.htm&d=AwIFAg&c=MaiD1Z8YVCD63kI1LCyPtWg0Yfm6VFptlj7wuHNxy-0&r=ohMdG7xLBNfJLpBxDYE1hxG5DHMxVAlyhTmATkid320&m=mAlyejQBCcHkT6KQWSRxQKC7VP5mvRZfLZw-XzZFjuo&s=ur1x-jwFjQM2KzM9yujtaHW45GSkynzAJGQyoNYqB0Y&e= > > Any help would be greatly appreciated. > > > Thanks, > Eric > > ********************************************************************** > *** CONFIDENTIALITY NOTICE *** > > This message and any included attachments are from MedSynergies, Inc. and > are intended only for the addressee. The contents of this message contain > confidential information belonging to the sender that is legally protected. > Unauthorized forwarding, printing, copying, distribution, or use of such > information is strictly prohibited and may be unlawful. If you are not the > addressee, please promptly delete this message and notify the sender of the > delivery error by e-mail or contact MedSynergies, Inc. at > postmas...@medsynergies.com. >
