Previously stated in the email. (I typed status=bulk...but meant search=bulk)
I have tried search=bulk in the past, on a tape I had issues with earlier in the year, but that tape is just sitting in the library and no backup process has ever used it. So I'm hesitant to use 'bulk'. -----Original Message----- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Nick Laflamme Sent: Tuesday, December 23, 2014 12:21 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] checkin libv command I haven’t seen an answer to another Nick’s suggestion, which this Nick endorses. > On Dec 23, 2014, at 8:47 AM, Nick Marouf <mar...@gmail.com> wrote: > > Hi Jeannie, > Would trying search=bulk make a difference? > > > label libv XXX search=b checkin=scr labels=b overwrite=y waitt=0 > > > > On Tue, Dec 23, 2014 at 7:39 AM, Jeanne Bruno <jbr...@cenhud.com> wrote: > >> Hello. We are using TSM manager 6.3.3.0. >> Tape Library is a DS3512. >> I'm trying to check in some brand new tapes (LTO Ultrium 1.5TB). >> On the DS3512, I choos the library and insert the tape into the machine. >> On the command line I use this command: >> >> label libv xxxxxx search=yes checkin=scratch labels=b overwrite=y >> >> My output is this: >> >> ANR2017I Administrator ADMIN issued command: LABEL LIBVOLUME xxxx >> search=yes checkin=scratch labels=b overwrite=y ANR0984I Process 120 >> for LABEL LIBVOLUME started in the BACKGROUND at 09:29:14. >> ANR8799I LABEL LIBVOLUME: Operation for library XXXXXX started as >> process 120. >> ANR8801I LABEL LIBVOLUME process 120 for library XXXXXX completed; 0 >> volume(s) labeled, 0 volume(s) checked-in. >> ANR0985I Process 120 for LABEL LIBVOLUME running in the BACKGROUND >> completed with completion state SUCCESS at 09:29:19. >> >> 0 volumes, but finished successfully and when I query the library >> XXXXXX, the new tape does not show in the list. >> >> I have also tried this command: >> CHECKIN LIBVOLUME xxxxxx SEARCH=YES CHECKLABEL=YES status=scratch >> WAITTIME=0 VOLLIST=A00xxxxL5. >> Results are the same. >> >> I have also tried putting the tapes on the door of the machine and >> not doing the 'insert media'...again results on the same. >> We just received 30 new tapes last week and I've tried about 10 of >> them so far. >> I have used the cleaning tape and did the clean process and also >> rebooted the DS3512.....same results afterwards. >> >> Any help, suggestions would be greatly appreciated. >> >> >> >> ____________________ >> Jeannie Bruno >> Senior Systems Analyst >> jbr...@cenhud.com<mailto:jbr...@cenhud.com> >> Central Hudson Gas & Electric >> (845) 486-5780 >>
