The only non-drive external cables to the library would be Ethernet for access to the web interface and either an analog phone line for the call-home modem or a second Ethernet for the TS3000 if you have one. (We missed the phone line requirement at first, so we had to scramble to get those in.)
Internally, each drive has a couple power connections and one or two RS422 or similar connections to a library node card, plus one or two fibre connections (newer LTO and 3592 support dual connections) to the "patch panel" (just a piece of sheet metal to snap in LC-LC couplers). IBM will be responsible for connections from the back of the patch, and you will be responsible for external connections to the patch. With multiple drive frames, you will also have connections from one frame to the next to connect up the node cards. I believe they are daisy-chained, so any given frame would only have one cross-frame cable going each direction. (Mine are both 2-frame libraries, but the second is an S24, aka HD frame, so there is no node card in use.) =Dave Zoltan Forray wrote: > > That is what I understood from previous emails but wanted to make sure but > someone here keeps insisting there should be another cable just for the > library. > > As for internally, how does the library talk to the drives/canisters? In > the 3494, it used RS422 cables from the drive cages/frames to the RTIC > cards. My understanding is there is a fibre patch-panel in each D-frame to > which you connect 2m cables to the drives and then I guess to connect the > fibre cables from the SAN switch to this same patch-panel? I really wish I > had the "maintenance manual" for the 3584! > > > On Tue, Apr 30, 2013 at 10:06 AM, Prather, Wanda > <wanda.prat...@icfi.com>wrote: > > > No. > > You can define the control path on any (and all) drives. > > The 2nd cable is if you want to have path failover configured on the drive. > > > > -----Original Message----- > > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of > > Zoltan Forray > > Sent: Tuesday, April 30, 2013 10:04 AM > > To: ADSM-L@VM.MARIST.EDU > > Subject: Re: [ADSM-L] Equating current 3494 configuration to TS3500 > > > > One more question about this. The book isn't very clear about whether a > > separate fibre cable is needed between the library and our SAN switch for > > communications. From the book: > > > > *The host server attaches to the library by using fiber cables that > > connect directly to a drive canister or through the library's patch panel.* > > > > Does that mean a separate fibre cable goes to the second connector of the > > 3592 designated as the "control path" drive(s)? > > [...trimming the rest...] -- Hello World. David Bronder - Systems Architect Segmentation Fault ITS-EI, Univ. of Iowa Core dumped, disk trashed, quota filled, soda warm. david-bron...@uiowa.edu
