Then Harold has the right answer. If you can telnet from the tsm server to the client at the port the listener is suppose to be using, than it is not a firewall problem. If the telnet attempt times out, either the cad (or scheduler) is not running, it is using a different port (see the cad startup messages in dsmwebcl.log), or there is a firewall/network issue blocking access.
David -----Original Message----- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Hughes, Timothy Sent: Wednesday, November 16, 2011 2:23 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run Hi Wanda We use prompted mode Thanks -----Original Message----- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Prather, Wanda Sent: Wednesday, November 16, 2011 11:55 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: Windows 2008 client ..TSM schedule won't run Are you running in polling (the default) or prompted mode? -----Original Message----- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Hughes, Timothy Sent: Wednesday, November 16, 2011 11:24 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] Windows 2008 client ..TSM schedule won't run Hi, We have 4 windows 2008 that are missing consistently the TSM scheduler is set to start however the backups don't run. f.y.i - We had this issue about 5 months ago and the admin set the UAC to the lowest settings and turned the firewall off and the backups worked until recently. The admin says the firewall is turned off and the settings are the same. Anyone else have or have had this issue? Windows 2008 64 bit R2 servers Tivoli clients 6.2.2.2 Thanks for any help/advice in advance!
