There are two options I would suggest. You could run an audit of the library using the audit library command in TSM. You would want to run this with no tapes being mounted in the drives. If you are unable to perform the audit at this time then try a checkin command to scan the library with the search option. When you specify the state make sure you specify it as scratch, if a tape is know as private it would not be made scratch but it would work vice versa. For the full syntax on the checkin use the help screen - help checkin libvol Checking the console log while you perform these commands would help in identifying the problem. tnx Mario
>>> On 8/6/2010 at 7:27 AM, mkarthikeyan08 <[email protected]> wrote: Sir, When i try to checkin my used tape volume in 3582 tape library connected to window, I am ending with status success. I can see the volume in the TSM MMC and control panel inventory. But the volume does not listed when i give the command query libvol. Anybody help me in this issue. Thanks in Advance Thanks +---------------------------------------------------------------------- |This was sent by [email protected] via Backup Central. |Forward SPAM to [email protected]. +---------------------------------------------------------------------- This e-mail and any accompanying attachments may be privileged, confidential, contain protected health information about an identified patient or be otherwise protected from disclosure. State and federal law protect the confidentiality of this information. If the reader of this message is not the intended recipient; you are prohibited from using, disclosing, reproducing or distributing this information; you should immediately notify the sender by telephone or e-mail and delete this e-mail.
