Hi all
My favorite forum is required once again for its invaluable knowledge. I am upgrading my tape library (3583) to a TS3200. Runs on Linux (small satellite site) SUSE 4 on an IBM xServer i686. TSM 5.5 I have a 2 port FC HBA card in it. I really want confirmation on the best method to switch over to the new library. Should I perform the following? 1. Halt TSM 2. Connect New Library 3. Confirm Connection to OS 4. Create new device class to new library 5. Start TSM 6. Configure new paths to drives and library 7. delete old library and its paths 8. checkin all tapes from old library as private I remember somewhere there is a problem linking the copy pool tapes to the new library. Any help/suggestions would be appreciated. Adrian Compton IT Baan Operation/ Group IBM Tivoli Admin Pharmacare Limited trading as Aspen Pharmacare P O Box 4002 Korsten Port Elizabeth 6014 Switchboard Tel No: +27 (0) 41 407 2111 Tel No: +27 (0) 41 407 2855 Fax: +27 (0) 41 453 7452 Cell: +27 (0) 82 320 4495 Email : [EMAIL PROTECTED] This email is solely for the named addressee. Any unauthorised use or interception of this email, or the review, retransmission, dissemination or other use of, or taking of any action in reliance upon the contents of this email, by persons or entities other than the intended recipient, is prohibited. If you are not the named addressee please notify us immediately by way of a reply e-mail, and also delete this email and any attached files. Disclaimer: You must scan this email and any attached files for viruses and/or any other defects. Pharmacare Limited accepts no liability for any loss, damages or consequence, whether direct, indirect, consequential or economic, however caused, and whether by negligence or otherwise, which may result directly or indirectly from this communication or of any attached files.
