While TSM is trying to migrate from one the disk storage pool to tape storage pool the "q request" returned:
ANR8346I QUERY REQUEST: No requests are outstanding. and the "q mount" continues to show: ANR2034E QUERY MOUNT: No match found using this criteria. Should not the "QUERY REQUEST" display that there is a pending mount request? > Hi > > Do a "q request" to see wether or not you have a mount request in TSM. > Normally with a tape library of type manual, TSM will issue a mount > request for you to manually mount the tape in the tape drive. After you > have mounted it, you should execute "reply X" where X is the mount request > number. > > If you dont do a reply, q mount will not return the tape, as TSM is > waiting for you to reply to the mount request. > > Best Regards > > Daniel Sparrman > ----------------------------------- > Daniel Sparrman > Senior Storage Consultant > Exist i Stockholm AB > Propellervägen 6B > 183 62 TÄBY > Växel: 08 - 754 98 00 > Mobil: 070 - 399 27 51 > > > > "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> > Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> > 2004-05-27 08:44 > Please respond to > "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> > > > To > [EMAIL PROTECTED] > cc > > Subject > Re: Insufficient number of mount points > > > > > > > Even with a tape into the tape drive the "q mount" returns: > > ANR2034E QUERY MOUNT: No match found using this criteria. > > >> issue q mount >> >> -----Original Message----- >> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of >> [EMAIL PROTECTED] >> Sent: Wednesday, May 26, 2004 2:09 PM >> To: [EMAIL PROTECTED] >> Subject: Re: Insufficient number of mount points >> >> >> There is only one drive installed but I'm not sure if there is another >> process using it... how can I be sure there isn't another process using >> the drive? >> >> >>> How many drives do you have. Check and see what else is using the >>> drives. The message usually means that all drives are being used. >>> >>> -----Original Message----- >>> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of >>> [EMAIL PROTECTED] >>> Sent: Wednesday, May 26, 2004 1:38 PM >>> To: [EMAIL PROTECTED] >>> Subject: Insufficient number of mount points >>> >>> >>> Hi, >>> >>> I'm very new to TSM and when I'm testing the migration process TSM is >>> showing the following message: >>> >>> ANR1134W Migration terminated for storage pool BACKUPPOOL - > insufficient >>> number of mount points available for removable media. >>> >>> TSM is trying to migrate data from a disk to a tape storage pool. >>> >>> The media is a DDS4 tape device and TSM version is 5.2.2-4 in a RedHat >>> 2.1. >>> >>> What could be wrong? >>> >>> Thanks in advance! >>> >>> >>> -------------------------------------------- >>> Reimer >>> [EMAIL PROTECTED] / www.quicksoft.com.br >>> Fone: (47) 231-6500 - Fax: (47) 231-6515 >>> >> >> >> -------------------------------------------- >> Reimer >> [EMAIL PROTECTED] / www.quicksoft.com.br >> Fone: (47) 231-6500 - Fax: (47) 231-6515 >> > > > -------------------------------------------- > Reimer > [EMAIL PROTECTED] / www.quicksoft.com.br > Fone: (47) 231-6500 - Fax: (47) 231-6515 > -------------------------------------------- Reimer [EMAIL PROTECTED] / www.quicksoft.com.br Fone: (47) 231-6500 - Fax: (47) 231-6515
