Hi Do a "q request" to see wether or not you have a mount request in TSM. Normally with a tape library of type manual, TSM will issue a mount request for you to manually mount the tape in the tape drive. After you have mounted it, you should execute "reply X" where X is the mount request number.
If you dont do a reply, q mount will not return the tape, as TSM is waiting for you to reply to the mount request. Best Regards Daniel Sparrman ----------------------------------- Daniel Sparrman Senior Storage Consultant Exist i Stockholm AB Propellervägen 6B 183 62 TÄBY Växel: 08 - 754 98 00 Mobil: 070 - 399 27 51 "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 2004-05-27 08:44 Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> To [EMAIL PROTECTED] cc Subject Re: Insufficient number of mount points Even with a tape into the tape drive the "q mount" returns: ANR2034E QUERY MOUNT: No match found using this criteria. > issue q mount > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of > [EMAIL PROTECTED] > Sent: Wednesday, May 26, 2004 2:09 PM > To: [EMAIL PROTECTED] > Subject: Re: Insufficient number of mount points > > > There is only one drive installed but I'm not sure if there is another > process using it... how can I be sure there isn't another process using > the drive? > > >> How many drives do you have. Check and see what else is using the >> drives. The message usually means that all drives are being used. >> >> -----Original Message----- >> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of >> [EMAIL PROTECTED] >> Sent: Wednesday, May 26, 2004 1:38 PM >> To: [EMAIL PROTECTED] >> Subject: Insufficient number of mount points >> >> >> Hi, >> >> I'm very new to TSM and when I'm testing the migration process TSM is >> showing the following message: >> >> ANR1134W Migration terminated for storage pool BACKUPPOOL - insufficient >> number of mount points available for removable media. >> >> TSM is trying to migrate data from a disk to a tape storage pool. >> >> The media is a DDS4 tape device and TSM version is 5.2.2-4 in a RedHat >> 2.1. >> >> What could be wrong? >> >> Thanks in advance! >> >> >> -------------------------------------------- >> Reimer >> [EMAIL PROTECTED] / www.quicksoft.com.br >> Fone: (47) 231-6500 - Fax: (47) 231-6515 >> > > > -------------------------------------------- > Reimer > [EMAIL PROTECTED] / www.quicksoft.com.br > Fone: (47) 231-6500 - Fax: (47) 231-6515 > -------------------------------------------- Reimer [EMAIL PROTECTED] / www.quicksoft.com.br Fone: (47) 231-6500 - Fax: (47) 231-6515
