Thanks for that. Unfortunately, the AutoVault option is not possible.
The funny thing is: When I was using a 3570 Magstar MP library, there were no problems at all, as the library would just wait for me to give a reply when the cartridge was ejected into the I/O station. After upgrading the library, It just doesn't work anymore.
Alex
From: Bill Boyer <[EMAIL PROTECTED]> Reply-To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: Re: Automated DRM volume handling LTO 3582 library Date: Mon, 8 Mar 2004 07:54:36 -0500
I just installed on at a site, but the are using Autovault instead of DRM. Autovault is configured to check out the volumes REM=NO CHECKL=NO. Then they just open the library, pull out the tapes called for by Autovault and put a scratch tape in the slot. then I have a scheduled checkin SEARCH=YES CHECKL=B for later in the day. The only difficult part is the tapes in the back of the 3582. You have to make sure you park the picker first. The manual says that's not the suggested way of doing it, but TSM/Autovault doesn't support their little buld load/unload funtion.
Bill Boyer DSS, Inc.
-----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of Alex den Hartog Sent: Monday, March 08, 2004 4:26 AM To: [EMAIL PROTECTED] Subject: Automated DRM volume handling LTO 3582 library
Hi listers,
Is anyone using this new LTO library from IBM with TSM / DRM? And if so, how are you performing your automated daily checkin / checkout routines for your DRM volumes?
Any tips would be very much appreciated!
Thanks, Alex
_________________________________________________________________ MSN Search, for accurate results! http://search.msn.nl
_________________________________________________________________ MSN Search, for accurate results! http://search.msn.nl
