I just installed on at a site, but the are using Autovault instead of DRM. Autovault is configured to check out the volumes REM=NO CHECKL=NO. Then they just open the library, pull out the tapes called for by Autovault and put a scratch tape in the slot. then I have a scheduled checkin SEARCH=YES CHECKL=B for later in the day. The only difficult part is the tapes in the back of the 3582. You have to make sure you park the picker first. The manual says that's not the suggested way of doing it, but TSM/Autovault doesn't support their little buld load/unload funtion.
Bill Boyer DSS, Inc. -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of Alex den Hartog Sent: Monday, March 08, 2004 4:26 AM To: [EMAIL PROTECTED] Subject: Automated DRM volume handling LTO 3582 library Hi listers, Is anyone using this new LTO library from IBM with TSM / DRM? And if so, how are you performing your automated daily checkin / checkout routines for your DRM volumes? Any tips would be very much appreciated! Thanks, Alex _________________________________________________________________ MSN Search, for accurate results! http://search.msn.nl
