ted
disregard previous note
i thought that fixed it, i set maxnummp=2
still same problem
toim
----- Original Message -----
From: "Ted Byrne" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, January 14, 2004 11:13 AM
Subject: Re: setting max capacity for storage pools
> Take a look at maxnummp for the node backing up the data. If it's set to
> 0, your data will not go to tape.
>
> Ted
>
> At 10:49 AM 1/14/2004 -0500, you wrote:
> >i have a disk storage pool which i previously never coded a maximum size
> >threshold for
> >i changed the disk storage pool to a max of 100mb, the server started
> >backig up. it
> >was running ok till it tried a 300mb file, i thought the 300mb file would
> >then go to the
> >next storage pool directly which is a tape pool.
> >
> >this mesage appeared in the dsmerror log file
> >
> >ANS1312E Server media mount not possible
> >
> >
> >the device class for the disk storage pool is
> >
> > Device Class Name: DISK
> >Device Access Strategy: Random
> > Storage Pool Count: 7
> > Format:
> > Device Type:
> > Est/Max Capacity (MB):
> > Mount Limit:
> > Mount Retention (min):
> > Mount Wait (min):
> > Unit Name:
> > Comp:
> > Library Name:
> >
> >
> >the device class for the tape storage pool is
> >
> > Device Class Name: NT3590
> >Device Access Strategy: Sequential
> > Storage Pool Count: 1
> > Format: 3590B
> > Device Type: 3590
> > Est/Max Capacity (MB): 9,216.0
> > Mount Limit: 3
> > Mount Retention (min): 1
> > Mount Wait (min): 60
> > Unit Name: 3590-1
> > Comp: Yes
> > Library Name:
> >
> >
> >tim brown
>
