Ted Works!!!
thanks tim ----- Original Message ----- From: "Ted Byrne" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, January 14, 2004 11:13 AM Subject: Re: setting max capacity for storage pools > Take a look at maxnummp for the node backing up the data. If it's set to > 0, your data will not go to tape. > > Ted > > At 10:49 AM 1/14/2004 -0500, you wrote: > >i have a disk storage pool which i previously never coded a maximum size > >threshold for > >i changed the disk storage pool to a max of 100mb, the server started > >backig up. it > >was running ok till it tried a 300mb file, i thought the 300mb file would > >then go to the > >next storage pool directly which is a tape pool. > > > >this mesage appeared in the dsmerror log file > > > >ANS1312E Server media mount not possible > > > > > >the device class for the disk storage pool is > > > > Device Class Name: DISK > >Device Access Strategy: Random > > Storage Pool Count: 7 > > Format: > > Device Type: > > Est/Max Capacity (MB): > > Mount Limit: > > Mount Retention (min): > > Mount Wait (min): > > Unit Name: > > Comp: > > Library Name: > > > > > >the device class for the tape storage pool is > > > > Device Class Name: NT3590 > >Device Access Strategy: Sequential > > Storage Pool Count: 1 > > Format: 3590B > > Device Type: 3590 > > Est/Max Capacity (MB): 9,216.0 > > Mount Limit: 3 > > Mount Retention (min): 1 > > Mount Wait (min): 60 > > Unit Name: 3590-1 > > Comp: Yes > > Library Name: > > > > > >tim brown >
