You might want to check the defined path as well. They have to be defined as on-line there as well.
-----Original Message----- From: Mark Bertrand [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 15, 2003 4:08 PM To: [EMAIL PROTECTED] Subject: q drive = status unknown We have two drives that show state unknown when queried with f=d. According to TSM: "Unknown The drive begins in drive state unknown as a result of being defined, as a result of server initialization, or as a result of having its status updated to online." We have had to update the status of these two drives to online after some tapes had knocked them offline. The drives are now online but TSM is not using them. Is there a way to change the drive state to empty or ready for operation? Storage Management Server for Windows 2000- Version 5, Release 1, Level 6.3 Thanks, Mark Bertrand -------------------------------------------------------------------------------------------------------------------------------------------------- Note: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. --------------------------------------------------------------------------------------------------------------------------------------------------
