Agree, but if you look at the http://www-3.ibm.com/software/sysmgmt/products/support/IBM_TSM_Supported_Devices_for_AIXHPSUNWIN.html#LTO%20Tape%20Drives
page you see a seperate section about other drives in a library., since th TSM device driver controlls the library, then the drives section should matter and tell you what to use.
Peter
At 13:19 16-6-2003 +0300, Zlatko Krastev/ACIT wrote:
Yes, I've opened the list and followed the link for L700 before to submit my post. Just checked to see was it changed recently. No detailed info and having "Base" on the list can easily mislead to usage of TSM driver.
Zlatko Krastev IT Consultant
"Peter Pijpelink - P.L.C.S. BV Storage Consultants" <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 16.06.2003 12:52 Please respond to "ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED] cc: Subject: Re: StorageTek L40 with Generation 2 LTO
I found that I had to login to see this list, strange also that someone needs an ID to see what hardware is working with a software product.
Anyway, I saw several descriptions of the STK libraries with the differant tapedrive vendors mentioned.
Did you also saw the list with a key symbol on the left.
Peter
At 10:06 16-6-2003 +0300, Zlatko Krastev/ACIT wrote: >Actually, that page is slightly misleading. Because StorageTek can equip >their libraries with any vendor LTO drives you may need different driver >and the site specifies only one of them. For STK with IBM LTO drives, OS >native IBM driver should be used. For STK with HP or Seagate drives, TSM >driver should be used. IMO there ought to be two lines - STK w/ IBM and >STK w/ HP/Seagate. >For example when we installed STK L700e at a customer site, we had to >disreagard the "info" for L700, stating TSM driver. The library was with >IBM drives and Atape.driver was the correct choice. > >Zlatko Krastev >IT Consultant > > > > > > >Richard Sims <[EMAIL PROTECTED]> >Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> >15.06.2003 22:56 >Please respond to "ADSM: Dist Stor Manager" > > > To: [EMAIL PROTECTED] > cc: > Subject: Re: StorageTek L40 with Generation 2 LTO > > >To add slightly to what Zlatko advised... > >http://www-3.ibm.com/software/sysmgmt/products/support/IBM_TSM_Supported_ Devices_for_AIXHPSUNWIN.html >specifies the levels and specifics you need. Note that IBM specifies in >RED that >the IBM device driver is needed. > >As always, refer to the lastest server README file for such new stuff, >wherein the LTO Generation 2 Support is outlined. > > Richard Sims, BU
