Many times discussed on the list. Sometimes TSM assumes there is
information on empty volumes. "aud v 473257 fix=y" should relieve the
problem.
Zlatko Krastev
IT Consultant
Joni Moyer <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
16.01.2003 15:12
Please respond to "ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED]
cc:
Subject: cancel process problem
Hi again everyone!
I have an administrative job running that is copying the onsite tape pool
to the offsite tapepool. For some bizarre reason it is asking for a
volume
that is offsite.
Volume Name: 473257
Storage Pool Name: DRCOPYDEC
Device Class Name: T3590DR
Estimated Capacity (MB): 0.0
Pct Util: 0.0
Volume Status: Empty
Access: Read-Only
Pct. Reclaimable Space: 0.0
Scratch Volume?: Yes
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 1
Write Pass Number: 0
Approx. Date Last Written:
Approx. Date Last Read:
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
It is not recognized as being offsite, but it is empty. I have tried to
cancel the administrative process, but it won't let it go. When I q mount
it doesn't show that that tape is mounted in a drive. I also tried to
delete the volume and audit the volume, but as I suspected it stated that
the volume was in use by another process. Any suggestions on how to
cancel
this process so that it releases the tape and I can then delete it from
TSM? Thanks!!!
Joni Moyer
Systems Programmer
[EMAIL PROTECTED]
(717)975-8338
