Here is what it is trying to do with the tape:
693 Backup Storage Pool Primary Pool TAPEDEC, Copy Pool DRCOPYDEC, Files
Backed Up: 0, Bytes Backed Up: 0, Unreadable
Files: 0, Unreadable Bytes: 0. Current
Physical
File (bytes): 12,909,748
Waiting for mount of output volume 473257
(20659
seconds).
This tape is not onsite. It is actually an offsite tape that is empty. I
have tried to cancel the backup of the storage pool and it will not let it
go... I've tried everything I can think of. Any suggestions?
Joni Moyer
Systems Programmer
[EMAIL PROTECTED]
(717)975-8338
Daniel Sparrman
<daniel.sparrman To: [EMAIL PROTECTED]
@EXIST.SE> cc:
Sent by: "ADSM: Subject: Re: cancel process problem
Dist Stor
Manager"
<[EMAIL PROTECTED]
T.EDU>
01/16/2003 08:16
AM
Please respond
to "ADSM: Dist
Stor Manager"
Hi
I haven't seen your script, but are you sure this is not an off-site
copypool volume, that the DRM process wants back to the library to convert
it to a scratch volume?
The volume has problably been reclaimed, and therefore, the script, that
probably runs somekind of DMR procedure, wants you to return the empty
tape to the library.
Best Regards
Daniel Sparrman
-----------------------------------
Daniel Sparrman
Exist i Stockholm AB
Propellervägen 6B
183 62 HÄGERNÄS
Växel: 08 - 754 98 00
Mobil: 070 - 399 27 51
Joni Moyer <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
2003-01-16 14:12
Please respond to "ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED]
cc:
Subject: cancel process problem
Hi again everyone!
I have an administrative job running that is copying the onsite tape pool
to the offsite tapepool. For some bizarre reason it is asking for a
volume
that is offsite.
Volume Name: 473257
Storage Pool Name: DRCOPYDEC
Device Class Name: T3590DR
Estimated Capacity (MB): 0.0
Pct Util: 0.0
Volume Status: Empty
Access: Read-Only
Pct. Reclaimable Space: 0.0
Scratch Volume?: Yes
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 1
Write Pass Number: 0
Approx. Date Last Written:
Approx. Date Last Read:
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
It is not recognized as being offsite, but it is empty. I have tried to
cancel the administrative process, but it won't let it go. When I q mount
it doesn't show that that tape is mounted in a drive. I also tried to
delete the volume and audit the volume, but as I suspected it stated that
the volume was in use by another process. Any suggestions on how to
cancel
this process so that it releases the tape and I can then delete it from
TSM? Thanks!!!
Joni Moyer
Systems Programmer
[EMAIL PROTECTED]
(717)975-8338
