Yep, I did. Since NT still needs 'therapeutic reboots' I took the opportunity to turn the NT box off while changing scsi cables et al. I just figured out how to 'fix' my anomaly (see my second post on this subject). It tells a little more about what I did and how it is fixed. (pull all tapes and check them back in ... yuck, but it worked :) ... I did audit library of the full library multiple times before I tried pulling all the tapes. When I did pull the tapes, to get a 'clean understanding' of what is in the library, I had TSM audit the empty library (fastest audit I have ever done :) ... then did check them all in again. ... Worked well. Thanks for the reply ... Jack
> -----Original Message----- > From: David Longo [SMTP:[EMAIL PROTECTED]] > Sent: Friday, November 08, 2002 6:24 PM > To: [EMAIL PROTECTED] > Subject: Re: q libv just stopped working? > > Just upgraded huh? Did you halt and restart TSM server after the > upgrade? Need to do that with library upgrade. I have AIX for server > platform, may need to do something else also for NT platform. > > Basically it's so TSM picks up new slots or other changes. You should > also run an "audit library" after any library upgrade. > > David Longo > > >>> [EMAIL PROTECTED] 11/08/02 05:44PM >>> > we just upgraded our IBM3583 library. > > Things were going OK but all of a sudden q libv just stopped working. > > Only one volume ( a cleaning tape, is seen in the library ) ... > bummer. > > Suggestions? > > TSM 4.1.3 on Windows NT4 SP6 > > > "MMS <health-first.org>" made the following > annotations on 11/08/2002 07:25:18 PM > -------------------------------------------------------------------------- > ---- > This message is for the named person's use only. It may contain > confidential, proprietary, or legally privileged information. No > confidentiality or privilege is waived or lost by any mistransmission. If > you receive this message in error, please immediately delete it and all > copies of it from your system, destroy any hard copies of it, and notify > the sender. You must not, directly or indirectly, use, disclose, > distribute, print, or copy any part of this message if you are not the > intended recipient. Health First reserves the right to monitor all e-mail > communications through its networks. Any views or opinions expressed in > this message are solely those of the individual sender, except (1) where > the message states such views or opinions are on behalf of a particular > entity; and (2) the sender is authorized by the entity to give such views > or opinions. > > ========================================================================== > ====
