Don't use step 3 if you use step 2. they do the same thing in different ways.
The output of step2 looks like a perfectly valid macro. Just run step 4. --------------------------------- Mr. Lindsay Morris CEO, Servergraph www.servergraph.com 859-253-8000 ofc 425-988-8478 fax > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of > Gill, Geoffrey L. > Sent: Friday, April 12, 2002 12:38 PM > To: [EMAIL PROTECTED] > Subject: 3494 library swap out > > > Ok, lots of help here from Bill, Lindsay and Tab, and I > appreciate it very > much. Now here is a stab at the steps I need to take. Since I'm > not much of > a script/programmer I'd appreciate any help in correcting mistakes I've > made. > > Note: This will be done from an AIX console on the TSM server. > > Step1: SET SQLDISPLAYMODE WIDE > > Step2: select 'checkout libv ' || trim(library_name) || ' ' || > trim(volume_name) || ' checkl=no rem=no' from libvolumes > /tmp/vols > > Step3: cat /tmp/vols | awk '{print "checkout libv library_name > $1 checkl=no > rem=no"}' >/tmp/macro > > Step4: dsmadmc -id=... -pas=... -itemcommit macro /tmp/macro > > The output of the file in step2 goes like this: > > checkout libv 3494LIB U00008 checkl=no rem=no > checkout libv 3494LIB U00026 checkl=no rem=no > checkout libv 3494LIB U00244 checkl=no rem=no > checkout libv 3494LIB U00302 checkl=no rem=no > And so on and so on. > > I'm sure my step3, which I took direct from the email Lindsay sent, needs > work. > > A little help......again please. > Thanks, > > Geoff Gill > TSM Administrator > NT Systems Support Engineer > SAIC > E-Mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > Phone: (858) 826-4062 > Pager: (877) 905-7154 >
