Hi Ed

I had a problem with our 3494 that might be related.
For reasons to do with AS400 connection, this library had a lot of manual 
intervention.  Thus it kept being put offline and online up to 10 times each day. The 
problem that developed was that during the process of going online, the accessor moves 
from the bottom left corner of the library to the top right. We have two sections 
installed, and the power drain as the accessor moved on both axes at maximum speed was 
enough to trip the power supply.

The CEs took ages to figure this out and replaced almost every accessor component.  
Once they realized what was going on and replaced the offending power supply, 
everything worked fine. 


Steve Harris
AIX and TSM Admin
Queensland Health, Sunny Sub-Tropical Brisbane Australia (home of the Salt Lake 
Olympics "Fall Guy")

>>> "Edward(Ed) J. Finnell, III" <[EMAIL PROTECTED]> 19/02/2002 3:25:32 >>>
We've had a problem with our 3494 from day one with unexpected power
outages. Our CE claims theres a design flaw in the power sequencing module,
we've had three outages since Oct 2000 and all have been fixed by flipping
the breaker to the 3494 and powering the box back on. Two of the outages were
to move it over to a "total UPS".
Edward(Ed) J. Finnell, III
Big Honkin' M/F Mgr.
www.ua.edu or bama.ua.edu/archives/ibm-main.html



**********************************************************************
This e-mail, including any attachments sent with it, is confidential 
and for the sole use of the intended recipient(s). This confidentiality 
is not waived or lost if you receive it and you are not the intended 
recipient(s), or if it is transmitted/ received in error.  

Any unauthorised use, alteration, disclosure, distribution or review 
of this e-mail is prohibited.  It may be subject to a statutory duty of 
confidentiality if it relates to health service matters.

If you are not the intended recipient(s), or if you have received this 
e-mail in error, you are asked to immediately notify the sender by 
telephone or by return e-mail.  You should also delete this e-mail 
message and destroy any hard copies produced.
**********************************************************************

Reply via email to