Yes! I couldn't remember the command...thanks. But to access the
service window, you DO have to be in service mode. I believe your first
guess is correct (tcpcfg).
Also, remember that you have to change the corresponding IP setting on
the attached server(s). In the case of AIX, that's in
/etc/ibmatl.conf. Not sure where it is on NT or other sys types.
-Lloyd
David McClelland wrote:
>
> Hi 3494-ers,
>
> I'm pretty sure than TCPCFG is your friend here - in service mode on the LM
> PC you'll need to open a service window (i.e. an OS/2 prompt), from where
> you'll type in TCPCFG (or is it TCPCONFIG? It's one of the two!). This will
> bring up a comprehensive TCP settings applet with about all the tweakable
> TCP/IP settings you'll be needing to change.
>
> I don't recall which settings you need to change in the Library Manager
> application though ...
>
> Hope this helps some...
>
> David McClelland
> ---------------------------
> Tivoli Storage Management Team
> IBM EMEA Technical Centre,
> Internet: [EMAIL PROTECTED]
>
> Lloyd Dieter <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 04-10-2001 22:01:51
>
> Please respond to [EMAIL PROTECTED]
>
> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
>
> To: [EMAIL PROTECTED]
> cc:
> Subject: Re: ibm3493(4)
>
> Pretty sure you have to be in service mode to do that. You may want to
> let your CE do it, as you can get into menus where you can easily get
> into trouble, but usually the service password is left at "service".
>
> This will let you get into the menu to change the IP for the LM. As a
> side note, if you have any other controllers in the 3494 (like an
> A50/60, perhaps), you may also need to change the IP on those as well,
> depending on how they talk to the LM. If they are doing ARTIC and not
> ethernet to the LM, this will not apply.
>
> Good luck (& be careful)
>
> -Lloyd
>
> Gerald Wichmann wrote:
> >
> > Anyone know how to change the IP on an ibm3494 tape library? Currently
> > our TSM server was on 10.100.2.1/16 and we've moved it to
> > 217.16.217.1/24.. I need to update the tape library and change it's IP
> > to that subnet, then the TSM server to look to that new IP instead of
> > the old one.
> >
> > I'm not really sure how to do that on an ibm3494..
> >
> > Gerald
>
--
-----------------------------------------------------------------
Lloyd Dieter - Senior Technology Consultant
Synergy, Inc. http://www.synergyinc.cc [EMAIL PROTECTED]
Main:716-389-1260 fax:716-389-1267
-----------------------------------------------------------------
