Hi 3494-ers,
I'm pretty sure than TCPCFG is your friend here - in service mode on the LM
PC you'll need to open a service window (i.e. an OS/2 prompt), from where
you'll type in TCPCFG (or is it TCPCONFIG? It's one of the two!). This will
bring up a comprehensive TCP settings applet with about all the tweakable
TCP/IP settings you'll be needing to change.
I don't recall which settings you need to change in the Library Manager
application though ...
Hope this helps some...
David McClelland
---------------------------
Tivoli Storage Management Team
IBM EMEA Technical Centre,
Internet: [EMAIL PROTECTED]
Lloyd Dieter <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 04-10-2001 22:01:51
Please respond to [EMAIL PROTECTED]
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject: Re: ibm3493(4)
Pretty sure you have to be in service mode to do that. You may want to
let your CE do it, as you can get into menus where you can easily get
into trouble, but usually the service password is left at "service".
This will let you get into the menu to change the IP for the LM. As a
side note, if you have any other controllers in the 3494 (like an
A50/60, perhaps), you may also need to change the IP on those as well,
depending on how they talk to the LM. If they are doing ARTIC and not
ethernet to the LM, this will not apply.
Good luck (& be careful)
-Lloyd
Gerald Wichmann wrote:
>
> Anyone know how to change the IP on an ibm3494 tape library? Currently
> our TSM server was on 10.100.2.1/16 and we've moved it to
> 217.16.217.1/24.. I need to update the tape library and change it's IP
> to that subnet, then the TSM server to look to that new IP instead of
> the old one.
>
> I'm not really sure how to do that on an ibm3494..
>
> Gerald
--
-----------------------------------------------------------------
Lloyd Dieter - Senior Technology Consultant
Synergy, Inc. http://www.synergyinc.cc [EMAIL PROTECTED]
Main:716-389-1260 fax:716-389-1267
-----------------------------------------------------------------
