Hi, I can't get a Soekris net4801 box to boot Plan 9 via PXE.
On my Plan 9 fileserver (which also runs ip/dhcpd and ip/tftpd), I created /cfg/pxe/<MAC of the first interface on the net4801>, which is almost identical to the file I use for a diskless terminal. The only differences are that I put mouseport, monitor and vgasize in comment. The remaining things, bootfile and nobootprompt are the same as for the terminal. I first tried to boot /386/9pc.gz and then /386/9pccpu.gz (see below). I also added *nomp=1 but that doesn't seem to get it any further. The console output looks as follows: --- begin --- Plan 9 from Bell Labs by PXE no vga; serial console only soekris 505 ns83815: auto neg timed out ns83815: auto neg timed out ether#0: 83815: port 0xE100 irq 10: 000024c15308 mercurius (192.168.1.12!67): /cfg/pxe/000024c15308 cpu0: 266MHz AMD Geode GX1 loop 11972 dev A0 port 1F0 config 848A capabilities 0200 mwdma 0000 mercurius (192.168.1.12!67): /386/9pccpu.gz gz...944713 => 946607+854152+313028=2113787 entry: f0100020 --- end --- Any idea what might be wrong? Kind regards, -- Frank Lenaerts ---------------------------------------- fr...@inua.be
