On Tue, Sep 25, 2012 at 6:42 PM, LIC mesh <licm...@gmail.com> wrote: > The new drive I bought correctly identifies as 4096 byte blocksize! > So...OI doesn't like it merging with the existing pool.
So... Any solution to this yet? I've got a 42 drive zpool (21 mirror vdevs) with 12 2TB drives that has 512byte blocksize. The remaining drives are 3TB with 4k blocksize, and the pool uses ashift=12. Recently this happened to one of the 2TB drives: mirror-13 DEGRADED 0 0 0 c4t5000C5002AA2F8D6d0 UNAVAIL 0 0 0 cannot open c4t5000C5002AB4FF17d0 ONLINE 0 0 0 and even though it came back after a reboot, I'd like to swap it for a new drive. Obviously, all new drives have 4k blocksize, so I decided to replace both drives in the vdev with 3TB drives. The new drives are Seagate ST3000DM001-1CH1, and there are already 12 of these in the pool. # iostat -En ... c4t5000C5004DE1EFF2d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Vendor: ATA Product: ST3000DM001-1CH1 Revision: CC43 Serial No: Z1F0TKXV Size: 3000.59GB <3000592982016 bytes> Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 Illegal Request: 0 Predictive Failure Analysis: 0 c4t5000C5004DE863F2d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Vendor: ATA Product: ST3000DM001-1CH1 Revision: CC43 Serial No: Z1F0VHTG Size: 3000.59GB <3000592982016 bytes> Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 Illegal Request: 0 Predictive Failure Analysis: 0 c4t5000C5004DD3F76Bd0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Vendor: ATA Product: ST3000DM001-1CH1 Revision: CC43 Serial No: Z1F0T1QX Size: 3000.59GB <3000592982016 bytes> Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 Illegal Request: 0 Predictive Failure Analysis: 0 When I try to replace the old drive, I get this error: # zpool replace tank c4t5000C5002AA2F8D6d0 c4t5000C5004DE863F2d0 cannot replace c4t5000C5002AA2F8D6d0 with c4t5000C5004DE863F2d0: devices have different sector alignment How can I replace the drive without migrating all the data to a different pool? It is possible, I hope? -- Trond Michelsen _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
