On May 28, 2012, at 2:48 AM, Ian Collins wrote:
> On 05/28/12 08:55 PM, Sašo Kiselkov wrote:
>> On 05/28/2012 10:48 AM, Ian Collins wrote:
>>> To follow up, the H310 appears to be useless in non-raid mode.
>>>
>>> The drives do show up in Solaris 11 format, but they show up as
>>> unknown, unformatted drives. One oddity is the box has two SATA
>>> SSDs which also show up the card's BIOS, but present OK to
>>> Solaris.
>>>
>>> I'd like to re-FLASH the cards, but I don't think Dell would be
>>> too happy with me doing that on an evaluation system...
>> If the drives show up at all, chances are you only need to work around
>> the power-up issue in Dell HDD firmware.
>>
>> Here's what I had to do to get the drives going in my R515:
>> /kernel/drv/sd.conf
>>
>> sd-config-list = "SEAGATE ST3300657SS", "power-condition:false",
>> "SEAGATE ST2000NM0001", "power-condition:false";
>>
>> (that's for Seagate 300GB 15k SAS and 2TB 7k2 SAS drives, depending on
>> your drive model the strings might differ)
>
> How would that work when the drive type is unknown (to format)? I assumed if
> sd knows the type, so will format.
I haven't looked at the code recently, but if it is the same parser as used
elsewhere,
then a partial match should work. Can someone try it out and report back to the
list?
sd-config-list = "SEAGATE ST", "power-condition:false";
-- richard
--
ZFS Performance and Training
richard.ell...@richardelling.com
+1-760-896-4422
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
