hi are the disk/sas controller the same on both server? -LT Sent from my iPad
On Mar 13, 2012, at 6:10, P-O Yliniemi <p...@bsd-guide.net> wrote: > Hello, > > I'm currently replacing a temporary storage server (server1) with the one > that should be the final one (server2). To keep the data storage from the old > one I'm attempting to import it on the new server. Both servers are running > OpenIndiana server build 151a. > > Server 1 (old) > The zpool consists of three disks in a raidz1 configuration: > # zpool status > pool: storage > state: ONLINE > scan: none requested > config: > > NAME STATE READ WRITE CKSUM > storage ONLINE 0 0 0 > raidz1-0 ONLINE 0 0 0 > c4d0 ONLINE 0 0 0 > c4d1 ONLINE 0 0 0 > c5d0 ONLINE 0 0 0 > > errors: No known data errors > > Output of format command gives: > # format > AVAILABLE DISK SELECTIONS: > 0. c2t1d0 <LSILOGIC-LogicalVolume-3000 cyl 60785 alt 2 hd 255 sec 126> > /pci@0,0/pci8086,25e2@2/pci8086,350c@0,3/pci103c,3015@6/sd@1,0 > 1. c4d0 <ST3000DM- W1F07HW-0001-2.73TB> > /pci@0,0/pci-ide@1f,2/ide@0/cmdk@0,0 > 2. c4d1 <ST3000DM- W1F05H2-0001-2.73TB> > /pci@0,0/pci-ide@1f,2/ide@0/cmdk@1,0 > 3. c5d0 <ST3000DM- W1F032R-0001-2.73TB> > /pci@0,0/pci-ide@1f,2/ide@1/cmdk@0,0 > 4. c5d1 <ST3000DM- W1F07HZ-0001-2.73TB> > /pci@0,0/pci-ide@1f,2/ide@1/cmdk@1,0 > > (c5d1 was previously used as a hot spare, but I removed it as an attempt to > export and import the zpool without the spare) > > # zpool export storage > > # zpool list > (shows only rpool) > > # zpool import > pool: storage > id: 17210091810759984780 > state: ONLINE > action: The pool can be imported using its name or numeric identifier. > config: > > storage ONLINE > raidz1-0 ONLINE > c4d0 ONLINE > c4d1 ONLINE > c5d0 ONLINE > > (check to see if it is importable to the old server, this has also been > verified since I moved back the disks to the old server yesterday to have it > available during the night) > > zdb -l output in attached files. > > ------------------------------------------------------- > > Server 2 (new) > I have attached the disks on the new server in the same order (which > shouldn't matter as ZFS should locate the disks anyway) > zpool import gives: > > root@backup:~# zpool import > pool: storage > id: 17210091810759984780 > state: UNAVAIL > action: The pool cannot be imported due to damaged devices or data. > config: > > storage UNAVAIL insufficient replicas > raidz1-0 UNAVAIL corrupted data > c7t5000C50044E0F316d0 ONLINE > c7t5000C50044A30193d0 ONLINE > c7t5000C50044760F6Ed0 ONLINE > > The problem is that all the disks are there and online, but the pool is > showing up as unavailable. > > Any ideas on what I can do more in order to solve this problem ? > > Regards, > PeO > > > > <zdb_l_c4d0s0.txt> > <zdb_l_c4d1s0.txt> > <zdb_l_c5d0s0.txt> > <zdb_l_c5d1s0.txt> > <zdb_l_c7t5000C50044A30193d0s0.txt> > <zdb_l_c7t5000C50044E0F316d0s0.txt> > <zdb_l_c7t5000C50044760F6Ed0s0.txt> > _______________________________________________ > zfs-discuss mailing list > zfs-discuss@opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/zfs-discuss _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
