what are the output of zpool status pool1 and pool2
it seems that you have mix configuration of pool3 with disk and mirror


On 12/18/2011 9:53 AM, Jan-Aage Frydenbø-Bruvoll wrote:
Dear List,

I have a storage server running OpenIndiana with a number of storage
pools on it. All the pools' disks come off the same controller, and
all pools are backed by SSD-based l2arc and ZIL. Performance is
excellent on all pools but one, and I am struggling greatly to figure
out what is wrong.

A very basic test shows the following - pretty much typical
performance at the moment:

root@stor:/# for a in pool1 pool2 pool3; do dd if=/dev/zero of=$a/file
bs=1M count=10; done
10+0 records in
10+0 records out
10485760 bytes (10 MB) copied, 0.00772965 s, 1.4 GB/s
10+0 records in
10+0 records out
10485760 bytes (10 MB) copied, 0.00996472 s, 1.1 GB/s
10+0 records in
10+0 records out
10485760 bytes (10 MB) copied, 71.8995 s, 146 kB/s

The zpool status of the affected pool is:

root@stor:/# zpool status pool3
   pool: pool3
  state: ONLINE
  scan: resilvered 222G in 24h2m with 0 errors on Wed Dec 14 15:20:11 2011
config:

         NAME          STATE     READ WRITE CKSUM
         pool3         ONLINE       0     0     0
           c1t0d0      ONLINE       0     0     0
           c1t1d0      ONLINE       0     0     0
           c1t2d0      ONLINE       0     0     0
           c1t3d0      ONLINE       0     0     0
           c1t4d0      ONLINE       0     0     0
           c1t5d0      ONLINE       0     0     0
           c1t6d0      ONLINE       0     0     0
           c1t7d0      ONLINE       0     0     0
           c1t8d0      ONLINE       0     0     0
           c1t9d0      ONLINE       0     0     0
           c1t10d0     ONLINE       0     0     0
           mirror-12   ONLINE       0     0     0
             c1t26d0   ONLINE       0     0     0
             c1t27d0   ONLINE       0     0     0
           mirror-13   ONLINE       0     0     0
             c1t28d0   ONLINE       0     0     0
             c1t29d0   ONLINE       0     0     0
           mirror-14   ONLINE       0     0     0
             c1t34d0   ONLINE       0     0     0
             c1t35d0   ONLINE       0     0     0
         logs
           mirror-11   ONLINE       0     0     0
             c2t2d0p8  ONLINE       0     0     0
             c2t3d0p8  ONLINE       0     0     0
         cache
           c2t2d0p12   ONLINE       0     0     0
           c2t3d0p12   ONLINE       0     0     0

errors: No known data errors

Ditto for the disk controller - MegaCli reports zero errors, be that
on the controller itself, on this pool's disks or on any of the other
attached disks.

I am pretty sure I am dealing with a disk-based problem here, i.e. a
flaky disk that is "just" slow without exhibiting any actual data
errors, holding the rest of the pool back, but I am at a miss as how
to pinpoint what is going on.

Would anybody on the list be able to give me any pointers as how to
dig up more detailed information about the pool's/hardware's
performance?

Thank you in advance for your kind assistance.

Best regards
Jan
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

--
Hung-Sheng Tsao Ph D.
Founder&  Principal
HopBit GridComputing LLC
cell: 9734950840
http://laotsao.wordpress.com/
http://laotsao.blogspot.com/

<<attachment: laotsao.vcf>>

_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Reply via email to